Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
As Stephen said. Nothing structural. Back in time squared slots used to be not unknown: it comes to my mind Panormo but Torres as well. Hauser I headstock with the squared slots, the V joint and precise curves was the German version of the Torres headstock and probably the most famous, I’d say.
im no fan of the square slots... but maybe ill come round over time.
The square slots are kind of fun to make with an Uber sharp chisel. I went to cutting them with a half round gouge and finishing with sandpaper glued around a dowel. That’s fun too.
Which way is more fun?
On aesthetic terms the thing I’d say is the square string ramp feels out of place on a headstock design with a Lot of curvy shapes, why make a curvy thing and cut rectilinear ramps in it? In the end it just depends on how the person that made the guitar can blend all the design elements together into pleasing whole.
Out of eighteen guitars I’ve only made two without pegs. The fist was my #2 and rounded slots on both ends, it looks like 💩
The second one, #14 I think, I used the square ramps down to a rounded slot on the nut end and round one the outer end of the slot. I think it looks pleasing with my inverted Torres tombstone headstock.
Photo is at an angle so it looks odd, it’s not that flat but with a bit of taper.
HR
Images are resized automatically to a maximum width of 800px
I prefer my flamenco guitar spicy, doesn't have to be fast, should have some meat on the bones, can be raw or well done, as long as it doesn't sound like it's turning green on an elevator floor.