Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
RE: New Culpepper cutaway blanca videos! (in reply to Leñador)
quote:
What's the scale on that?
Nut width: 53 mm String spacing at nut: 46 mm String spacing at bridge: 58 mm Neck thickness (depth): 22.5 mm @ nut to 24 mm @ 9th fret Bridge tie block: 12-hole Scale length: 655 mm String height at bridge: 7.5-8 mm Action at 12 fret: 3.0 mm bass to 2.7 mm treble Body depth at heel: 91 mm Body depth at lower bout: 94 mm Body width upper bout: 283 mm Body width waist: 243 mm Body width lower bout: 370 mm Total body length from 12th fret to tail: 490 mm Spruce top Spanish cypress back and sides Handmade rosette (Santos style) 100% French polish finish Indian Rosewood bindings Full cutaway Dual source LR Baggs pick-up Rubners with friction resistant bearing roller ends TKL hard case
RE: New Culpepper cutaway blanca videos! (in reply to rombsix)
quote:
quote:
What's the scale on that?
Nut width: 53 mm String spacing at nut: 46 mm String spacing at bridge: 58 mm Neck thickness (depth): 22.5 mm @ nut to 24 mm @ 9th fret Bridge tie block: 12-hole Scale length: 655 mm String height at bridge: 7.5-8 mm Action at 12 fret: 3.0 mm bass to 2.7 mm treble Body depth at heel: 91 mm Body depth at lower bout: 94 mm Body width upper bout: 283 mm Body width waist: 243 mm Body width lower bout: 370 mm Total body length from 12th fret to tail: 490 mm Spruce top Spanish cypress back and sides Handmade rosette (Santos style) 100% French polish finish Indian Rosewood bindings Full cutaway Dual source LR Baggs pick-up Rubners with friction resistant bearing roller ends TKL hard case
I remember in the past you were interested in finding a guitar with a smaller than normal nut width and scale?
RE: New Culpepper cutaway blanca videos! (in reply to orsonw)
quote:
I remember in the past you were interested in finding a guitar with a smaller than normal nut width and scale?
You are correct. I just decided to try a more traditional set of dimensions to see if I can make it work with capo (I have a 20th fret) and/or if I can rehabilitate my wrist and strengthen it, whether I'd be able to do OK with more standard dimensions. (I want to see if it's "all in my head" too like many other people said about just needing to learn to stretch the fingers, etc.)
Printable Version
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread