Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
|
|
Curved thumb nail
|
You are logged in as Guest
|
Users viewing this topic: none
|
|
Login | |
|

Paul Magnussen
Posts: 1791
Joined: Nov. 8 2010
From: London (living in the Bay Area)

|
RE: Curved thumb nail (in reply to Argaith)
|
|
|
See if this helps: I wrote it several years ago. It certainly works for thumbnails like mine, which hooks over its whole width; yours may be more problematical. Does anyone have a solution to nails that curve downward? If my nails grow to where you can just see the nail from palms up, they curve down and no amount of filing seems to avoid hooking. This has been a major problem for many years and any help would be greatly appreciated. The solution to this is easy, but almost nobody seems to know it. I owe my knowledge to an article by the late Peter Sensier, in the old "BMG" magazine. My nails are very hooked indeed, but, using this method I have had no problem for 30+ years. Unfortunately, it is easier to demonstrate than describe. Hold your hand horizontally, palm down. Then the usual way to hold the file is vertically. But instead, hold the file horizontally too, so that it's parallel to your hand. The basic idea is to file your nails this way, from underneath; then the resulting cross-section must be flat, because the nail-file is flat. There are a few wrinkles: 1) You will need to tilt the file towards you a bit, i.e. about 15º towards the conventional position. 2) You will also need (if you play off the left side of your nails, as most people do, Presti/Lagoya excepted) to tilt your hand to the left a bit, so that nails are shorter on the left side than the right. 3) When finished, round off the nails with the file in the conventional position to remove the resulting knife-edge. 4) Be careful not to cut the quick of your nails with the file -- and especially, don't use an emery-board! Hope this helps.
_____________________________
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Apr. 24 2012 17:35:51
 |
|
New Messages |
No New Messages |
Hot Topic w/ New Messages |
Hot Topic w/o New Messages |
Locked w/ New Messages |
Locked w/o New Messages |
|
Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts
|
|
|
Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET |
0.078125 secs.
|