Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
|
|
Harmonics Question for Luthiers
|
You are logged in as Guest
|
Users viewing this topic: none
|
|
Login | |
|
bahen
Posts: 383
Joined: Mar. 4 2006
|
Harmonics Question for Luthiers
|
|
|
This is probably a question you luthiers (/luthier enthusiasts) are better equipped to answer: what does a guitar's harmonics tell you about the guitar itself? First, let me perhaps clarify what I understand harmonics to be - it's the very high-pitched ting you hear when you place your finger at the 7th or 12th fret, for example, but do not press down completely, but do hit the string. Ting. I noticed I can do this at the 3rd fret, 7th, 12th, 15th (I think), and even dead-centre of the sound-hole. Am I being clear? You slight press the string with your left hand, then hit it with the right. What do these positions tell you about the frequency of the guitar? What do they tell you about the guitar in general? I have a blanca and it has very, very loud harmonics. Any informed comments are welcomed. I'm very curious. - bahen
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date May 26 2006 6:34:10
|
|
TANúñez
Posts: 2559
Joined: Jul. 10 2003
From: TEXAS
|
RE: Harmonics Question for Luthiers (in reply to bahen)
|
|
|
When you strike a guitar string, the note that you hear is called the 'fundamental'. It's the loudest note created, but along with it you are also hearing 'harmonics'. These are subsidiary tones that accompany the fundamental, and are responsible for making each instrument sound the way it does. Guitar 'harmonics' are created when you lightly touch the string with your finger at specific positions and then pluck the string. This causes both sections of the string, to the right and left of the spot you're touching, to vibrate simultaneously, giving a bell like quality to the note. What you are doing is removing the fundamental and only hearing the harmonics. There are three points along the string : the fifth, seventh and twelfth frets ... directly above the fret-wire. At these points, the string is divided exactly into fourths, thirds and halves respectively. The sound comes from these perfect fractions of string ringing together. If you try it anywhere else on the string, you hear a dead sound without any ring. The notes created are not always the same notes as the fretted note. At the 12th fret, they are the same note, and in fact playing one after the other is a good way to see if the intonation on your instrument is right: both fretted note and harmonic should be identical in pitch. If they're not, there could be a problem with the bridge. At the 7th fret, the harmonic is one octave higher than the fretted note. At the 5th fret, the harmonic is the 'fifth' of the fretted note, but 2 octaves higher. In other words, on the E string, the fretted note at the 5th fret is an A note, but the harmonic played at the 5th fret is an E note two octaves higher.
_____________________________
Tom Núñez www.instagram.com/tanunezguitars
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date May 26 2006 14:26:28
|
|
JBASHORUN
Posts: 1839
Joined: Jan. 23 2005
|
RE: Harmonics Question for Luthiers (in reply to TANúñez)
|
|
|
quote:
There are three points along the string : the fifth, seventh and twelfth frets ... directly above the fret-wire. At these points, the string is divided exactly into fourths, thirds and halves respectively. The sound comes from these perfect fractions of string ringing together. If you try it anywhere else on the string, you hear a dead sound without any ring. As far as I can remember, a harmonic sound is produced at EVERY division point of the string. Eg. 1/2: 12th fret, 1/3: 7th fret, 1/4: 5th fret, 1/5: approx. 4th fret, 1/6: approx. 3rd fret, and so on. It should be noted that you will get the same harmonic sound at each position relative to the division of the string: divide the string into quarters, and you will get the same harmonic by moving your finger a quarter of the way up the string. There are certain points (such as at the 5th, 7th and 12th fret) where the harmonics are more obvious than others. But if the room is quiet enough, and you listen closely, you can actually hear the harmonic sound at other positions too. That said, I think the number of possible harmonics isn't infinite... but depends on the number of octaves the instrument has. As for what the harmonics tell us about the quality of a guitar, I'm not quite sure. Although you can check the intonation of a string by comparing the note at the 12th fret to its harmonic in the same position. If the two don't match, then you need to adjust the intonation accordingly... which is easier said than done on acoustic guitars! Man, I wish I had payed more attention during those acoustics lectures! Jb
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date May 26 2006 20:00:58
|
|
JBASHORUN
Posts: 1839
Joined: Jan. 23 2005
|
RE: Harmonics Question for Luthiers (in reply to bahen)
|
|
|
quote:
And how do you compare harmonics across blancas? Across negras? How would you compare harmonics between the two? As far as I know, harmonics should be pretty similar on a blanca and negra. But thats just one person's theory, as I was told the ribs and back of a guitar affect the sound by 1% of the total. But if this percentage is higher, you might well expect to see a stronger response with the more dense woods. I was told that the main factors influencing the harmonics are the nut, saddle, strings and soundboard. Denser nut and saddle materials like bone, etc will give a harder barrier to reflect the waveforms off (and transmit string vibrations), and produce a stronger output than less dense materials- this is why some materials are preferred for nuts and saddles. Also issues like string length, thickness, tension, etc. Armando is correct about soundboards being tuned to different frequencies, but many luthiers do not actually have the scientific equipment to manipulate this whilst making guitars. I think you can check the approximate frequency by cutting a round piece of cardboard shaped like your soundhole. Then pluck each open string seperately whilst covering the soundhole and then removing the cardboard (open/closed/open closed/etc.). The string where the contrast between the loudness and quiteness is greatest is closest to the frequency. you can then do the same thing whilst working your way up the first few frets of this string, as you might find it a position or two further up. Luthiers: correct me if I got any of that mixed up, after all, I'm still quite new to this. Jb
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date May 26 2006 21:00:20
|
|
New Messages |
No New Messages |
Hot Topic w/ New Messages |
Hot Topic w/o New Messages |
Locked w/ New Messages |
Locked w/o New Messages |
|
Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts
|
|
|
Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET |
6.152344E-02 secs.
|