Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva, Tom Blackshear and Sean O'Brien who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
Hello to all. I'm asking on behalf of a friend whose family got him a yamaha silent guitar as a present for his birthday.
He finds that the upper part of the thinner wood is "digging" into his ribs, making playing a bit uncomfortable.
He got the guitar to a shop to customize it and asked also for them for a fix. They tried to apply a leather piece (seen in one of the pictures) but could not stabilize it so they took it off again.
Could anyone suggest a solution to this problem?
Images are resized automatically to a maximum width of 800px
RE: Yamaha silent guitar possible cu... (in reply to AndresK)
I didn't watch the video so maybe it covers this but I'd suggest putting a beveled scoop into the back edge. This could be done with a block plane or a belt sander or both and then finished over. From what I can see, the back edge as it stands looks like it could be pretty uncomfortable. I'm surprised Yamaha didn't address this in the design phase, actually.
Posts: 16223
Joined: Dec. 14 2004
From: Washington DC
RE: Yamaha silent guitar possible cu... (in reply to AndresK)
play standing with a strap. Been doing this for years with my Cordoba (I use if for both rumba and flamenco proper), saves the back and other body ailments a lot of grief as well.
RE: Yamaha silent guitar possible cu... (in reply to AndresK)
He was very happy with the replies. May I ask how would the rope stay in place. I believe just by tightening it firmly from one point to the other as in the video? Can someone avoid gluing the thing on the guitar?