Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
|
|
changing golpeador
|
You are logged in as Guest
|
Users viewing this topic: none
|
|
Login | |
|
Tom Blackshear
Posts: 2304
Joined: Apr. 15 2008
|
RE: changing golpeador (in reply to Ricardo)
|
|
|
Ricardo, If you are technically proficient removing the plates then I use LMI's white glue, mixed with a little distilled warm water, to glue the plate on the top. I rough the top's surface with 400 sand paper, remembering not to go through the finish, especially if it has color. And then rough underneath the tap plate for better glue hold, A little surface roughing is fine. I use a small veneer roller to push out the excess glue and air bubbles; cleaning the glue up from the roller and plate as I go. When most of the plate looks clear with no air bubbles, then I let it dry for a day or two, or until the entire plate looks clear. And the next time you need to replace a tap plate, it will come off with a little heat from a light or moist rag localized, on the plate, with a little hot water. And then you clean all the glue off the top with a warm moist rag and start over.
_____________________________
Tom Blackshear Guitar maker
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Apr. 4 2014 16:19:59
|
|
New Messages |
No New Messages |
Hot Topic w/ New Messages |
Hot Topic w/o New Messages |
Locked w/ New Messages |
Locked w/o New Messages |
|
Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts
|
|
|
Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET |
6.347656E-02 secs.
|