Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
Iam using Savarez red card basses (HT) on my new guitar and althought the guitar feels super easy to play, the basses feel a bit like buttery rubberbands.
I had never used these basses before so I would like to know if they are supposed to feel like this when compared to the strings Ive been using, La Bella elite flamenco (820?).
RE: Not another strings thread (in reply to Sr. Martins)
quote:
Savarez red card basses
Red card? That means you're out of the game, and you don't want that now do you? I'd rather you stick with a yellow card, or perhaps a green card so you can come to the USA and buy Yamaha flamenco guitars for less money than what they go for in Europe.
(Probably the most useless of contributions I have made in terms of posts on this forum)
RE: Not another strings thread (in reply to Sr. Martins)
I dont want to start another thread just to ask this so...
I was looking at my guitar from an angle and Ive noticed that I can see the fan braces from the top of the guitar.. It looks as if the fans are pulling the top on those spots...
RE: Not another strings thread (in reply to Sr. Martins)
Imprinting is not uncommon. Thin tops, humidity changes, too much clamping pressure when gluing the fan braces down, and type of glue used are some reasons for it. Just make sure your guitar hasn't gotten dry, and you are properly humidifying it.
RE: Not another strings thread (in reply to Sr. Martins)
That is usually a sign that the guitar needs to be humidified or else a crack may happen. If humidity is at least 40% where you are then it is likely something else that is less common cause. Something to try is soaking a sponge, ringing out the excess water thoroughly and placing it inside the body of the guitar and leaving it like that in the case for a night or two. I've seen "thirsty" guitars "drink" every last drop of water out of a sponge in a night or two while totally fixing any concaving in the top. Just make sure to ring out the sponge well and there is no danger of damaging your guitar.
RE: Not another strings thread (in reply to Sr. Martins)
Then as was previously stated its something that happened during the glueing and clamping process. Try asking in the litherie section what the causes and hazards may be. I would say if you're in Portugal then it likely won't be a problem but just take a humidifier with you if you travel with it. It may be slightly more at risk of cracking but ask lutherie to be sure.