Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
Forum fella´s questioning about guitars used in Paco´s last album brought up links that led me to a video of a flamenco guitar built by Pepe Romero´s son of same name.
First thing that makes you stunned are these young guys these days like Pepe or Andy Culpepper who not enough come to learn the guitar, but also how to build some so amazingly well. But that remarkable point may be spared for a dedicated thread sometime.
As I just learned from the GSI site, Pepe followed a structural concept from Miguel Rodriguez that uses a bracing pattern radiating from the bridge instead of from the soundhole.
Now, don´t ask me why hearing of such appeared plausible to me spontaneously, as that would be a vague mixture of general physics with layman´s pondering, but take a listen to the clip here yourself.
If this a fully articulate guitar or what is it? -
Naturally, it could be more due to the overal building talents of the man than to bracing patterns, but it wouldn´t surprise me if such bracing would only help the output of an extremely well voiced and balanced specimen.
Ruphus
PS: I would love to hear how a blanca of such build would sound.
This type of bracing was being used long before the Rodriguez example that inspired the young Pepster. The Spanish born - Argentina based maker Jose Yacopi (1916-2006) began using it in the late 1940s and continued with it for his best guitars for many years.
The Yacopi operation evolved into a factory in Buenos Aries that is currently under the direction of Jose's son Fernando.
As I just learned from the GSI site, Pepe followed a structural concept from Miguel Rodriguez that uses a bracing pattern radiating from the bridge instead of from the sound-hole.
Actually the braces are reversed and radiate from the bottom block of the guitar, something that has been done before Miguel Rodriguez.
tom, are you saying the point of convergence, if you will, is at the tail block? that is, the struts are closer to each other at the tail block and farther from each other as one moves towards the soundhole?
The R. Dynasty has its standards, and San Diego is just as beautiful as it is expensive ... ( First time I notice that he moved from their Spanish domicile, which must be a great place to live in.)
But seriously, I agree. Such is through the roof, even for top notch.
tom, are you saying the point of convergence, if you will, is at the tail block? that is, the struts are closer to each other at the tail block and farther from each other as one moves towards the sound-hole?
As I just learned from the GSI site, Pepe followed a structural concept from Miguel Rodriguez that uses a bracing pattern radiating from the bridge instead of from the soundhole.
I just watched the video and PR said that the fan braces fan out from the tail end of the soundboard, not from the bridge.
As I just learned from the GSI site, Pepe followed a structural concept from Miguel Rodriguez that uses a bracing pattern radiating from the bridge instead of from the soundhole.
I just watched the video and PR said that the fan braces fan out from the tail end of the soundboard, not from the bridge.
Oops, sorry, everyone knows that already.
Ethan, you are a funny guy! Hope everything is well with you.....
... a reverse fan system (fans radiating from the bridge area, rather than from the soundhole)...
Thanks for correcting me, and now that I see that we are talking some cm further dorsal: A builder of mucho flamenco sounding guitars told me of his special approach in the exact same region. ... Who knows, could be there´s the G-point of that thing. :O|
The real question is not where the fan braces point, but how thick is the top with those braces and how is the bridge shaped and at what stage is it glued on etc. Antonio Moya showed me his guitar made by a famous builder, and the braces go across the top as a 45 degree angle. It's a super guitar, and it's not a Conde'-
The reason the Yacopi design has not caught on is because very few builders take it on as a project to learn how to make. Most designs will work if you take the time to build several of them and learn how to put them together. They all have subtle differences and the Yacopi is almost esoteric by comparison to the Torres 'kite' set up of fan braces going the opposite direction pointed towards the sound hole. The differences in the basic structure make it a bit intimidating for builders unless you have the cojones to wander out into the unknown and the patience to deal wiht players who tell you it's wrong.
It's one of those things that would be fun to blind test. Ask the player to tell the difference between Conde's and non Conde's- Blancas and Nergras and Yacopis and other non standard bracing from Torres bracing.
If someone did that and the blind test was conducted well the result would likely be that you can't tell the difference between any of it without reading labels. Players would just end up showing which individual guitars they like better.
I'd for sure put one of my guitars into that blind test.
Posts: 1696
Joined: Jan. 29 2012
From: Seattle, Washington, USA
RE: Bridge-centered bracing (in reply to estebanana)
quote:
The real question is not where the fan braces point, but how thick is the top with those braces and how is the bridge shaped and at what stage is it glued on etc.
I tend to agree that the bracing layout pattern is not so important as far as sound is concerned.
However, I think the traditional patterns radiating from around the 12th fret or thereabouts gives some important structural support between the bridge and the sound hole that would be diminished with the fan braces radiating from the tail. I have seen enough guitars that have collapsed in this area with string tension on the bridge.
It's one of those things that would be fun to blind test. Ask the player to tell the difference between Conde's and non Conde's- Blancas and Nergras and Yacopis and other non standard bracing from Torres bracing.
If someone did that and the blind test was conducted well the result would likely be that you can't tell the difference between any of it without reading labels. Players would just end up showing which individual guitars they like better.
We talked about something like this in that other thread about violins. I'd love to see this…..Maybe GSI wouldn't but I think Trilogy might be willing, the owners a pretty cool guy.
Any of you guys listened to Pepe´s clip? Though my personal taste gravitates to something more hoarse ( which I assume is mainly a question of set up / would still be doable), and preferring blanca characteristics anyway, I am seriously impressed by the fat, round tone and eveness accross the register. Substance and fully retained notes galore.
And it seems outstanding to me how lush and separating in the same time this guitar sounds. Maybe it won´t cut through the noise of a juerga that well, but it should certainly excell for solo guitar / instrumentals.
I am so impressed by its sonic footprint that I´ve tried several times to access and listen again, but have been unable for now. -
While reconsidering, I guess I wouldn´t always be delighted to see folks pointing out works of colleagues to me if I was a luthier. But this case is meant in the sense of sharing impressions and assuming the generousity of sincere appreciation for good work.
I know that you guys have reason to be self-confident enough and that you can be very generous and appreciative towards your guilds achievements. -
Seeing Stephen´s explanation of how it takes experimenting to exploit another construction like this one, I think it only fits that someone like Pepe Romero went after it. I guess his living conditions may allow easily for the luxury of investing funds and time for an uncoventional concept. ( + having had the chance to come across a M. Rodriguez of that kind and be taken by it enough in the first place.)
eeing Stephen´s explanation of how it takes experimenting to exploit another construction like this one, I think it only fits that someone like Pepe Romero went after it. I guess his living conditions may allow easily for the luxury of investing funds and time for an uncoventional concept. ( + having had the chance to come across a M. Rodriguez of that kind and be taken by it enough in the first place.)
I think he's a good guitar maker, and you are correct, he and his family have an extensive collection of guitars to study and that can never hurt. I understand he learned a lot from Dake Traphagen who is also a fine maker.
But I doubt it is easy even coming from a guitar minded family, it still takes drive and hard work. It's like Gitanos, just about every kid can dance or play some guitar if they try, but to become a top artist they still have to put in many years and hours.
Actually if my name was Yacopi it could be true. Sometimes I fiddle things absent in mind that are hard to believe. Just to think of all the models I had to free from gispum with a hammer in the dental laboratory, after been absent minded once again. At that time rightly so though, with spectacular babes robbing me hours of sleep.
- Today instead it rather be nursing jobs for battered pets that take my time. Hopefully no lasting change of occupation.