Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
Thomas is right. It is a bit of a risk, and the 2 links you've found are worthless. They say nothing.
The main thing is if the guitar is lacqured or french polished. If it's french polished, DONT do it. It takes between 3 days and a week to remove, and it is risky.
Hi Thomas, In principle I agree with you but my guitar needs other repairs before I sell it. The things I can do myself I am willing to try; otherwise it will be to expensive. Anders, Thank you for your willingness to give me your advice. The guitar is a Alhambra 7P. I am not absolute sure but I think it is "poliuretano"; only after this model they do it with "goma laca". Regards Antonio
Well it's poliurethano or nitrocellulosa and a spruce top. So here's a how to do:
You need mineral spirits (white spirits) (Sustituto de aguarrás ( aguarras mineral) en castellano), and a brush. Around 3 days or more of time (important!) and thats it.
Put the guitar on a stand and brush a bit of white spirit above the tap plate and leave it for a while, then start to peel the tapplate above a very little bit. some 2mm, nothing more. brush with white spirits again and leave. From now on many times a day do the following: brush a bit with white spirits, peel a few milimeters and brush again with white spirits. Thats one session. Repeat as many times as possible, AND DONT DRAG THE TAP PLATE!!!!! it must come of more or less by itself. The white spirit must dissolve the glue and that take time.
Hi Anders, Thank you so much for your answer. Indeed, it makes a lot more sence to try to dissolve the tap plate instead of trying to take it off. When you say "peel the tap plate above a very little...", do you think I can use a small scratcher or knive in a very gentle way? thanks again Antonio p.s. I will be away for "pascoa" but I will try next weekend.
Well I'm not a native english speaker either, so I can be creating my part of the confusion. (why don't you guys speak danish?)
Important: NO TOOLS, scrapers, knives or whatsoever , just a very gentle dragging and brushing underneath the tapplate. The whole process demands a lot of these brushing sessions. The amount depending on the quality of the tapplate. A good one requires at least 20 sessions!!!!!
Escribano is right, you dissolve the adhessive (glue) and not the tapplate
Last. If you are not sure how to do it, don't. I really mean it. You can make serious harm to the guitar.
I was talking to a well-known and respected luither in San Jose, California about installing a tap plate on a flamenco guitar. He completely turned me off when he said, “We always install the tap plate immediately after the lacquer is applied”! So he only did it if he built or refinished a guitar and that was his technique. For French Polish he said they did not install tap plates. The beauty of his technique was that the tap plate would have a good binding to the wood – like forever!
I could relate many horror stories about guitar luthiers as well as some true artist with wood, who were and are greatly appreciated for their outstanding work.
To be honest, I hate installing tapplates. After all this work of building a guitar, you have to put this plastic thing on it, knowing that you can really screw it and make the guitar impossible to sell. I've develloped a good tecnique on this subject, but still...... Tapplates on French polish
Hi Anders, I found "essencia de terebintina rectificada" in Lisbon. This is less agressive then aguarras. I will try this first on a small spot on a less visible place on the guitar to see how it reacts with the varnish; only after this I will try on the tap plate. Thanks for your advice Antonio
I doubt that Trebentina (spanish) is strong enough to dissolve the glue. White spirit (sustituto de aguarrás) is not hurting laquer, not even shellack (goma laca)
Hi Anders, I finally removed the tap plate...piece of cake . Easier than I thought Now I just need a new fingerboard and frets to have this guitar in perfect condition for sale. Any tips about this?? Well... Once again thank you so much for your your instructions; you've been a great help. Regards Antonio
No, it's not to bad as long as the guitar is varnished with nitro.
About the frets, etc. You most probably dont need a new fingerboard, but maybe some new frets and a light fingerboard shaving. But this I wont recommend you to do unless you really know how to do it, or really want to learn.
Hi Anders, If you have the time and are willing to explain,I really want to learn. I have already change the frets twice on this guitar; first time I screw it because I filed to much and really did fail to do the crowning well. Second time it was ok but when taking the frets out, there were small pieces of the fingerboard that were also removed. When filing the frets at the edges, it was dificult to do it without snatch away small fragments of varnish. So, I have a guitar that plays well but, with a closer look one can see closer to the frets, small fragments of ebony are missing (only in a few frets) , the tips of the frets are not filed properly and the varnish crack in 2 or 3 spots near the frets....what a mess! I have found a shop in Lisbon that do repairs on guitars. If this is going to cost to much, I am willing to try it myself. Regards Antonio
On tap plate fitting, I fitted the thin self adhesive ones to a classical guitar which I'm using to learn flamenco style playing. Looked fine apart from 4-5 air bubbles which I couldn't deal with or tolerate so spent several hours teasing the plates off and several more picking off the glue with the glue left on the plate. Then finished off with lighter fluid. all's fine now but it was VERY scary for a while. I've been advised not to fit one permanently as it may affect resale value. cut it up to the soundhole and stick with sellotape to the inside has been suggested. Anyone done it?