Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
RE: 'Attack' in building a flamenco... (in reply to Ramón)
You´ll probably hate this answer: To get it all balanced out.....
First what is attack. It has something to do with the tones jumping out of the guitar and prefereably even with a light hand.
How to get it. Well use a good bracing system (There´s no one and only) and build light, but be carefull not to build to light because what happens is that the guitar get to bassy and is not capable of handling a hard hand. It kinds of implodes. The balance must be stiff enough to make the guitar sound flamenco when playing Bulerias without capo and it must be loose enough to sound earthy when playing Soleares with a capo on the 6th fret.
It takes time to find the balance and sometimes its better than other times. But so is life.
RE: 'Attack' in building a flamenco... (in reply to Ramón)
Hi Ramon, I don't think that head angle is one of those factors that will make a difference here. Granted, I don't change the head angle on my guitars any more than a couple of degrees ever. By attack, you're referring to a quick response or "bite" as some call it. A guitar can have a good attack and also posess sustain. So do not think of a guitar as doing either one well exclusive of the other. How to do it? The top (total soundboard weight plus the bridge) must jump into action very fast. The top must be very light weight. Choose your spruce carefully, go for light weight spruce. Don't worry if it's not super stiff; bracing can make up for a slight lack in stiffness. Keep the bridge light weight. Compare a bunch of bridges of similar size - try different woods, but avoid heavy stuff like ebony.
But I did play a great flamenco once that had an ebony bridge. The luthier was very good at his game, with over thirty years experience, so he knew what he was after. Good luck, Marcus Dominelli Dominelli Guitars
Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca
RE: 'Attack' in building a flamenco... (in reply to Ramón)
Thank you, both.....
Interesting... So I DID do pretty good on #1....but want to improve. Paying closer attention to thicknesses this time, and I was curious about the 'bridge discussion' in Luthiery:
If a very light wood would be ideal - but the strings can pull through, what about using bone or glueing a strip of ebony to the contact/tie surfaces to reinforce those areas only, while keeping the bridge superlight?
Any thoughts on a wood that could be an interesting choice?
RE: 'Attack' in building a flamenco... (in reply to Ramón)
Hi Ramon, I don't think that the kind of wood you choose is as important as its weight and stiffness, based on your experience. The weight variation within a given species, such as Indian or Brazilian rosewood is too great to say that one is preferable over the other. Rather, just keep track of the weights and stiffnesses of each bridge you use, and see how it effects the sound. If you have a guitar that does'nt sound quite right, you might consider changing the bridge on it. You'll get a feel for how important the bridge is in shaping the sound of each guitar.
Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca
RE: 'Attack' in building a flamenco... (in reply to Ramón)
Thank you, Marcus. I will add to my notes. I just got an old drug dealer's triple beam scale and donated it to the workshop, so it will get some legit-use, now....!
Printable Version
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread