French Polish Over Existing Lacquer

Costs are rising and times are tough.
Please consider a donation to keep this
place going.

Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.

You are logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >>Discussions >>Lutherie >>

Page: [1]

Message

<< Newer Topic Older Topic >>

seanm

Posts: 169
Joined: Apr. 5 2005
From: Halifax, Nova Scotia

French Polish Over Existing Lacquer

First off I know that french polish is a technique and that the question really reads lacquer over existing lacquer ... that said :)

I have a guitar that is obviously spray lacquered (and thick) due to the large amount of finish cracking on the spruce top. Now I am quite proficient at french polishing techiques but have only finished new guitars. Two questions:

1) Can I re-melt the existing finish on the top buy simply applying coats of lacquer by french polishing and will this help (i.e. fill the cracks) at all?

2) Or would I be better of to remove the old finish and simply french polish the top anew (knowing that some builders prefer the top polished and sides sprayed anyway)

Thoughts and thanks in advance?

Sean

REPORT THIS POST AS INAPPROPRIATE | Date Jun. 7 2006 16:36:56

Phil

Posts: 382
Joined: Jul. 7 2003
From: Rota, Spain

RE: French Polish Over Existing Lacquer (in reply to seanm)

Sean,

I don't have an answer, but I do have a couple of questions. I always thought that french polish was a hand rubbed technique using linseed oil and shellac. If you use other finishing materials is it still called french polish? Also, could you give a brief explanation on how it's done with laquer? How does the final finish differ from a sprayed finish?

Thanks,
Phil

REPORT THIS POST AS INAPPROPRIATE | Date Jun. 7 2006 20:06:46

seanm

Posts: 169
Joined: Apr. 5 2005
From: Halifax, Nova Scotia

RE: French Polish Over Existing Lacquer (in reply to seanm)

Sorry for the confussion. I associated the shellac flakes with the resin used to make lacquer since they historically both come from the lac beetle. Spray lacquers can be of different bases, for sure. I basically wondering if most spray lacquers 'melt' when they come in contact with a solvent and that is why I was wondering if traditional dissolved shellac flake french polishing could be used over something like a nitrocellulose lacquer.

French Polish is a technique (as you described) and not the material used however you need a very fast drying (almost instantaeneous) 'polish' for the technique to work. Shellac flakes disolved in 99% alcohol creates this type of medium and is basically the only thing used as far as I know. The oil is simply a lubricant for the rubbing process and not intended to be a part of the final finish (the latter stages of polishing are called 'spiriting out' where you remove excess oil). Sorry, I wasn't more clear :)

Sean

REPORT THIS POST AS INAPPROPRIATE | Date Jun. 8 2006 13:35:26