Foro Flamenco


Posts Since Last Visit | Advanced Search | Home | Register | Login

Today's Posts | Inbox | Profile | Our Rules | Contact Admin | Log Out



Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.





"Ideal" Saddle and Fret Crown Height???   You are logged in as Guest
Users viewing this topic: none
  Printable Version
All Forums >>Discussions >>Lutherie >> Page: [1]
Login
Message<< Newer Topic  Older Topic >>
 
Gecko

Posts: 218
Joined: Jan. 2 2006
From: New Mexico

"Ideal" Saddle and Fret Cr... 
I have completed the fingerboard wedge on my old negra. However, before I do the final sanding and glue the fingerboard back on there are a couple of questions I have, principally for Anders, Pablo orAaron, or anyone else who may know the answers.

1. What is the “ideal” height for a saddle. In other words how much saddle should “ideally” be sticking out above the saddle slot?

2. What is the crown height for the fret wire you guys use?

3. What is the “standard” action height at the 12th fret? In other words when you guys build a flamenco what action height do you initially set it to, providing it has not been specified by the buyer.

Thanks
  REPORT THIS POST AS INAPPROPRIATE |  Date May 1 2006 10:37:24
Guest

RE: "Ideal" Saddle and Fre... (in reply to Gecko) 
Hi Gecko

Good questions. Easy to answer .

1) Does not exist. Depends on the bridge height. I like my guitars to have a 7mm high bridge and 1,5mm saddle above the bridge.

2) I use 2 of Stew macs fretwire One which is a bit more than 1mm high and another one which is a little higher.

3) 6th string: 3mm and 1st string 2,5mm. I can go lower if the player wants it, but this is a good standard setup, where you wont get much buzzing if you know how to control a flamenco guitar.

_____________________________
  REPORT THIS POST AS INAPPROPRIATE |  Date May 1 2006 16:50:02
 
Gecko

Posts: 218
Joined: Jan. 2 2006
From: New Mexico

RE: "Ideal" Saddle and Fre... (in reply to Guest) 
quote:

ORIGINAL: Anders

Hi Gecko

Good questions. Easy to answer .

1) Does not exist. Depends on the bridge height. I like my guitars to have a 7mm high bridge and 1,5mm saddle above the bridge.


Thanks Anders. I appreciate the info. Wow, 1,5 saddle above bridge!! I was estimating about 4mm or 2/16". I may now have to sand the fingerboard itself down a little and re-cut fret slots (their off a little anyway and the fingerboard will need leveling). I can't sand the wedge much more as its 0 mm at the nut and I would have to start sanding into the neck in that area. Should be no big problem as the fingerboard is 6mm thick, just more sanding, sigh.
  REPORT THIS POST AS INAPPROPRIATE |  Date May 1 2006 20:32:30
Guest

RE: "Ideal" Saddle and Fre... (in reply to Gecko) 
Take it easy.

A 6mm bridge and a 2,5mm will work very well as well.

A tip. When I put a long straight edge on the top of the fingerboard before fretting (The straightedge goes all the way down to the bridge, I want to have around 2mm between the straightedge and the soundboard. This give me the angle I want on my guitars and the stringheight above the soundboard that I like. (Some 8mm)

_____________________________
  REPORT THIS POST AS INAPPROPRIATE |  Date May 2 2006 6:35:45
Page:   [1]
All Forums >>Discussions >>Lutherie >> Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET

0.046875 secs.