perspex/acrylic templates

Costs are rising and times are tough.
Please consider a donation to keep this
place going.

Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.

You are logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >>Discussions >>Lutherie >>

Page: [1]

Message

<< Newer Topic Older Topic >>

Stu

Posts: 2537
Joined: Jan. 30 2007
From: London (the South of it), England

perspex/acrylic templates

Hi all,

Whats the best way to make some of your own templates from clear perspex?

I know you can buy some for various parts of the guitar but whats the best way of making custom ones? for various router jobs or what have you.

Is 3d printing a thing now for guitar making templates/jigs etc? or would you use a pro laser cutting service?

many thanks

REPORT THIS POST AS INAPPROPRIATE | Date Dec. 22 2023 10:27:43

RobF

Posts: 1611
Joined: Aug. 24 2017

RE: perspex/acrylic templates (in reply to Stu)

Hi Stu,

Perspex/acrylic is good, so is the really high density flooring wood and it’s cheaper. Perspex can be cut on a table saw with a plastic cutting blade. Main thing with the plastic stuff if to keep the speeds low when using bits, etc… as it melts and gums up. It can also chip, if you’re not careful.

The flooring wood is dense and dimensionally stable but is murder on edge tools so save old bits and blades for working this instead of ruining new ones. The stuff with the easy clean fake grain on one side and hard coating on the other is good as the hard finish handles double-sided tape really well and magic marker lines can be wiped right off. It makes for very durable templates. If you’re using it as a routing template the sides can be further strengthened by coating with CA, which soaks right in and will give you a cracking headache as a bonus feature.

I have a friend in China who has been 3D printing jigs and templates for years now. He uses traditional Chinese marquetry as inspiration for his rosettes and purflings and some of his jigs are ridiculously detailed and complex. The end result justifies it, however, as his work is quite striking.

*edit* I missed the last part… It’s good to get in the habit of whipping together a jig whenever it occurs to you a task could benefit from it. Like a little project in itself. Sometimes a jig can be as simple as a stick of wood, so it doesn’t hurt to mark its purpose on it, or even make an application note about it in your workbook. Then toss it in a box when you’re done and six months later pull it out and scratch your head while trying to figure out WTF the darned thing is for…The point I’m trying to make is using an external cutting service is probably overkill as jigs and templates can often be in a constant state of evolution and it’s good to foster the mindset of cobbling one together on an as needed basis, just as a normal part of the process.

REPORT THIS POST AS INAPPROPRIATE | Date Dec. 22 2023 15:03:18