Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
I'd like to ask about bridge placement vs scale length. When building my #1, which has 660mm scale, I used compensation as per Anders' recommendation: 1mm for treble side and 1,5mm for bridge side (resulting in 661 / 661,5mm scale length). I'm building small Torres-style guitar now, which has much shorter scale (604mm). Can I use the same compensation or should it be more/less?
RE: Compensation for short scale (in reply to kominak)
Classicals require a little bit more compensation than flamecas, because on a classical there is a little bit more string height, thus more need for compensation. Just one more thing to consider (and confuse).
I have always scaled scale length and compensation up or down by the same factor. Eg if I increased the scale length by a factor of 1.01539; then I would also increase the compensation by a factor of 1.01539.
Scale 650mm x 1.01539= 660mm. Compensation 2mm x 1.01539= 2.094mm
As you can see it is almost not enough to make a practical difference.
One thing to remember: The scale length is the theoretical uncompensated string length, so if you change the amount of compensation, but you leave the frets and the nut be, then you have not changed the scale length, only the vibrating string length.
RE: Compensation for short scale (in reply to kominak)
To make a really good compensation, its better to make it a tad shorter than longer. That way you can do the final adjustment in the saddle-bone. Thats impossible if the saddle-bone is to far behind. I have never done a guitar with such a short scale, so I would just do as SEden wrote. flat 1 - 1,5mm depending wheather its a flamenco or classical setup.
Printable Version
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread