Revisiting the Yamaha CG171SF

Costs are rising and times are tough.
Please consider a donation to keep this
place going.

Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.

You are logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >>Discussions >>Product Reviews >>

Page: [1]

Message

<< Newer Topic Older Topic >>

etta

Posts: 341
Joined: Jan. 20 2010

Revisiting the Yamaha CG171SF

Much has been discussed about this inexpensive flamenco guitar. i have owned two of them and have played 6 or 7. Several years ago I tried four of them at a "big box" music store. I bought what I thought was the best one. Over the years I have added a bone saddle, played with action adjustments, but the big change came from "porting", a 1'1/2 inch hole on the upper bout. Strings made a difference also; these guitars tend to have a rather muted treble. Savarez corum/Alliance HT strings made it much brighter. This guitar is now easy to play and has a quick response and is just fine in all respects. It is not of luthier quality, but makes a great camping, sofa, and roughing around instrument. If you have dogs are little kids around this is a safe guitar for perilous environments. The finish and and structural integrity seem bomb proof. I have some really fine guitars, but this little Yamaha gets lots of play.

REPORT THIS POST AS INAPPROPRIATE | Date Jun. 10 2015 3:06:19

ngiorgio

Posts: 168
Joined: Nov. 1 2005
From: Florida, USA

RE: Revisiting the Yamaha CG171SF (in reply to etta)

I have had three of them. The best one had an ebony fretboard and was made in Taiwan. I did the same, added a bone saddle, adjusted the action down and installed better quality tuning machines. It was a great "leave out on the stand" guitar. Got tired of it and sold it. Had another made in china w/rosewood 'board and this one although bought rather inexpensively was not very good. Sold it real quick. The last one was the newer 172SF and this one was a total dog. Was the only guitar I had for a short time and when another decent guitar came my way, was very happy to unload it. I have found them to be quite inconsistent but if you can find a good one they can serve a beginner well and as you mention make a great "beater".

REPORT THIS POST AS INAPPROPRIATE | Date Jun. 10 2015 13:47:00