Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
Okay, so I realize a cajon is a really crude instrument compared to a guitar, and you guys probably aren't very interested in them, but here goes anyway:
I've built a few cajons now -- fancied them up with some inlay on the top, hand dovetailed construction, and I've variously added piezo pickups, onboard volume control, and a snare that can be engaged/disengaged with a foot pedal. Friends saw the first and wanted one, so I built more.
I used 3/16" birch plywood for the soundboard, 3/4" pine shelving for sides, bottom, top and back (I tried 1/2" pine on one back and it seemed to improve the resonance).
I like the sound of the ones I have built, but I have heard other commercially available cajons with a different sound that I also like. They are more bassy, and have more sustain (not a concept that's easy to apply to a packing crate). Not sure if the difference is the way they are miced or eq'd, though.
Anyway, a brief internet search revealed that a low-grade guitar soundboard isn't much more expensive than the specialty plywood I have been using, which leads me to some questions:
(1) Does anyone know a source of inexpensive soundboard tonewood? I don't think that a cajon deserves fine-grained spruce or cedar, but it does need to be strong enough to withstand a beating so I'll add some fan bracing or something similar.
(2) Speaking of bracing, if I put an arch in the soundboard and thinned the edges ... any thoughts on what would the effect be? IMproved resonance? I really like the resonant effect I get with a golpe on my guitar . . .
(3) I know there is a lot of discussion about how much the back/sides wood affects sound in a guitar. Probably not as important in a cajon, but I have noticed that some of the cajons I like do have thinner plywood construction and are resonant. I can't make the whole cajon out of tonewoods because you have to sit on the thing, but I could put a tonewood back on. What will the effect be? Added resonance? Should I then put the sound hole(s) on the side(s) instead of one on the back? I have seen cajons built that way, (2 side holes with a snare on one soundboard and none on the other).
Any thoughts would be very welcome.
Thanks, Tony Arnold (the guy that makes the carved cejillas).
_____________________________
"Flamenco is so emotionally direct that a trained classical musician would require many years of highly disciplined formal study to fail to understand it."
Printable Version
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread