Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
|
|
Building a flamenco - 6
|
You are logged in as Guest
|
Users viewing this topic: none
|
|
Login | |
|
Ramón
Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca
|
Building a flamenco - 6
|
|
|
Bridge. Another rather time consuming little piece, but what I learned would definitely make it go faster next time. Took nearly the whole day to make it, then, a few more hours for little finish and cleanup details. A few minor errors, but all in all, I'm quite happy with the finished piece. For my first ever... However, I'm not quite sure about the little inlay fillet I used... Too different from the rosette? Feedback? Also, next time, I think I'll just do the 2 small strips of bone on the front and back. Easier, cleaner, and more wood shows through.
Images are resized automatically to a maximum width of 800px
Attachment (1)
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Jun. 11 2006 3:22:28
|
|
Ramón
Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca
|
RE: Building a flamenco - 6 (in reply to Ramón)
|
|
|
ykabban, Thank you... This is my first-ever guitar. I was asked to keep somewhat of a 'journal' on FF to show my progress, thoughts, problems, etc., so 'Building a Flamenco' 1-6 is on the Luthier's Section here. I am about to post more gains, tomorrow, as the inside is now finished, and preparing for the back to close it up, and I will then have a complete 'box' - but a guitar that I can hold, nonetheless! No, not a kit. From scratch, entirely. EXACT (as I can come) to the Manuel Reyes plans by Tom Blackshear. My measurements, so far - have been within hundreds-of-an-inch; i.e.; side thickness calls for +-2.0mm. I'm at 1.98mm, etc...I had to do the fan braces 3 times to get it right, cross braces twice, tentallones twice.....Thankfully, all small items, but just time consuming to do over and over. So I'm going VERY slow, trying to look ahead, and understand! what I'm doing and how it applies to the next step. The luthier who's teaching me: http://robertheinguitars.com/ without who's help none of this could be achieved - at least not to the level I'm a working at; tools, guidance, understanding. Bob's 'saved' me a couple of times already, so kudos to him and his patience. And to Tom at La Falseta, who passed along some much needed info on the neck! So I will post a shot of the insides, braces, and sides, tomorrow, and then I will probably close her up this weekend. In the end, no matter how beautiful she turns out, it's ALL about sound and playability. Thanks again for the feedback...
Images are resized automatically to a maximum width of 800px
Attachment (1)
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Jun. 16 2006 2:25:38
|
|
Ramón
Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca
|
RE: Building a flamenco - 6 (in reply to ykabban)
|
|
|
I looked inside again to remind myself what my Rodriguez looks like, but I know I was quite surprised that it was somewhat similar to Reyes when I first looked - and Jose was a student of Miguel Rodriguez, and Miguel and Manuel are/were from the same town, so it' figures they would probably have studied each other's work and and talked. My 1A is the same as your's. 2 guys here both played my guitar and immediately ordered. Hard to beat for the money, that's for sure. My instructor just got in from Spain and played it - as he said; "looking for holes" but couldn't find a one. Said it's a pretty damn nice guitar... So that was nice! Anyway, I went with cross-grained cypress on the backjoint reinforcement, as the plan called for. I've seen 2 Reyes insides and neither had a 45° backbrace (but my Rodriguez does??). I cannot imagine it would have been done for anything but strength, as boxes have been built from cardboard to prove the point of the soundboard. And I don't have enough (as in zero) experience to deviate. I spoke with Tom, and he said; "Build a Reyes, or build a bit of this and that, if that's what you want", so I stuck to the plan. I will tell you this; I would like to give my notes to the Luthier's Guild so this would be a much more complete set of plans for others. These are pretty weak on details... Pegs???? Is there some other kind of way to tune a flamenco???? I have zero-interest in machines. So today I bent the macassar ebony bindings and the cypress back linings. Tried cedar...ugh...Don't bother. Cedar is SOOOOO hard to bend. Cut the sides to the plan shape, glued the linings in....More pics and details tomorrow under #7, and tomorrow I will box it up, and Monday, I have a guitar to hold! A long way to go, but I can feel it, which will be kool The pic is the individual spruce tentallones glued in. The sides and heel weren't cut down yet and sanded. Shot this pic on Friday. Forgot my camera today....
Images are resized automatically to a maximum width of 800px
Attachment (1)
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Jun. 18 2006 2:04:15
|
|
New Messages |
No New Messages |
Hot Topic w/ New Messages |
Hot Topic w/o New Messages |
Locked w/ New Messages |
Locked w/o New Messages |
|
Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts
|
|
|
Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET |
8.203125E-02 secs.
|