Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.
This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.
We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.
|
|
Barre Chords - any advice?
|
You are logged in as Guest
|
Users viewing this topic: none
|
|
Login | |
|
Patrick
Posts: 1189
Joined: Jul. 7 2003
From: Portland, Oregon
|
RE: Barre Chords - any advice? (in reply to Womble)
|
|
|
quote:
Sean, I've heard this before, but I find it difficult to visualize this position. Am I correct in assuming that in this position the barred strings would be slightly pulled down if the guitar face is perpendicular to the floor? Thanks! We need to go one step further with this technique and breakdown the mechanics. First you need to think in terms of a "heavy hand (arm)" and the "light hand (arm)". OK, here is what you do (and this is very important). Hold your arm in front of you. Now release all muscle tension and let it fall via gravity. It's a lot harder than you may think. If at any time in its fall, you feel muscle tension breaking the fall of the arm at all, you are not doing it correctly. The arm must literally fall totally unimpeded. This is known as the "heavy arm". Do this several times until you internalize the feeling. The opposite is the "light arm". This is the felling we have when we hold our arm in front of us. The interesting thing is our mind perceives the weight of the arm as zero, but in fact is being supported by muscle tension. Again hold your arm in front of you with the elbow bent at about a ninety-degree angle. Now release the muscle tension from your shoulder allowing the arm to drop (holding the bend at the elbow). Notice as the arm drops, the hand doesn't fall straight down, rather articulates back toward our body. Using these mechanics, you can see by using this method (heavy arm) with a barr, you see that the tension is directed into the fret board rather than down. Trust me it really does work. After you work with it for a while, you will constantly be shifting from a “heavy arm” to a “light arm” position without putting any thought into it. Doing barr’s doesn’t have to be torturous. Just apply a bit of physics.
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Apr. 12 2006 19:53:02
|
|
Patrick
Posts: 1189
Joined: Jul. 7 2003
From: Portland, Oregon
|
RE: Barre Chords - any advice? (in reply to Womble)
|
|
|
quote:
Hmm, I just tried the heavy arm, no thumb, and my finger slid right down off the fret board. Actually, for a second it was pressing the treble strings, but not the basses for sure. I dont' get it. I have to use my thumb to make it work, but I have to apply hardly any pressure (with the thumb). The hand kind of hangs on the neck by the index finger and the thumb. In my case, I think it is a combination of pressure and the weight of the arm that makes it work. All I can say is, it definitely improved by barres. I can't say they are effortless, but I sure don't fight them anymore. I learned the method from Eborneo classical site a year or two ago. The guy wrote about ten pages on how to do it. That's "classical guitar" speak at its finest. To us "flamenco players", it’s, "just let your arm hang on the neck."
|
|
|
REPORT THIS POST AS INAPPROPRIATE |
Date Apr. 13 2006 22:35:10
|
|
New Messages |
No New Messages |
Hot Topic w/ New Messages |
Hot Topic w/o New Messages |
Locked w/ New Messages |
Locked w/o New Messages |
|
Post New Thread
Reply to Message
Post New Poll
Submit Vote
Delete My Own Post
Delete My Own Thread
Rate Posts
|
|
|
Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET |
0.0625 secs.
|