flamenco neck angles, larger frets, etc....

Costs are rising and times are tough.
Please consider a donation to keep this
place going.

Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.

You are logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >>Discussions >>Lutherie >>

Page: [1]

Message

<< Newer Topic Older Topic >>

Ramón

Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca

flamenco neck angles, larger frets, ...

Hola all...

I am curios about the thoughts of the other luthiers on neck angle relief. My plans call for 2-3 degrees, but I was looking at a nice 70's Conde last night, and saw it had maybe 1°.

Some makers claim 'flat'... The flatter you go keeps the strings off the soundboard low, but HOW do you keep to buzz out!!?? The Conde was like 2.5mm off the 12th on the low E - with NO buzz at all.

I understand sanding a 'break' in the fretboard, 19th fret, Low E, being the lowest area, but I'm curious how others look at relief, buzz, sanding the fretboard angle, etc...

AND!!!...I was curious about a slightly larger fret; a hair wider and taller, as it barrs nicely, but am afraid of more buzzing due to height (although extremely small increases)... I use the FW72 from LMI...

Gracias...

REPORT THIS POST AS INAPPROPRIATE | Date Oct. 11 2007 19:29:42

jshelton5040

Posts: 1500
Joined: Jan. 17 2005

RE: flamenco neck angles, larger fre... (in reply to Ramón)

quote:

ORIGINAL: Ramón

Hola all...

I am curios about the thoughts of the other luthiers on neck angle relief. My plans call for 2-3 degrees, but I was looking at a nice 70's Conde last night, and saw it had maybe 1°.

Some makers claim 'flat'... The flatter you go keeps the strings off the soundboard low, but HOW do you keep to buzz out!!?? The Conde was like 2.5mm off the 12th on the low E - with NO buzz at all.

I understand sanding a 'break' in the fretboard, 19th fret, Low E, being the lowest area, but I'm curious how others look at relief, buzz, sanding the fretboard angle, etc...

AND!!!...I was curious about a slightly larger fret; a hair wider and taller, as it barrs nicely, but am afraid of more buzzing due to height (although extremely small increases)... I use the FW72 from LMI...

Gracias...

I've never thought of neck deflection as an angle (although it is of course) rather as a measurement. It's about 2mm higher at the nut than at the 12th fret, slightly more on a classic. If the deflection is slightly off after you glue on the back then you can taper the fingerboard from end to end to compensate. If you make the neck flat (parallel with the top) you'll have to have a large taper end to end on the fingerboard or the saddle will be too tall.

My understanding of "relief" is a very slight warp in the fingerboard.

If the neck deflection is perfect I make the fingerboard absolutely uniform from end to end then scrape a taper on the bottom from the 12th fret to the sound hole to allow for the arch in the top and the deflected neck.

On flamenco guitars I think the fingerboard should be perfectly straight and flat with the strings off. If the slots are cut the right size the frets should need almost no dressing after they are installed. The string tension pulls a very slight warp into the fingerboard if the neck is sized correctly (relief).

Big frets do not cause excessive buzzing.

_____________________________

John Shelton - www.sheltonfarrettaguitars.com

REPORT THIS POST AS INAPPROPRIATE | Date Oct. 12 2007 15:32:43

TANúñez

Posts: 2559
Joined: Jul. 10 2003
From: TEXAS

RE: flamenco neck angles, larger fre... (in reply to jshelton5040)

quote:

If the neck deflection is perfect I make the fingerboard absolutely uniform from end to end then scrape a taper on the bottom from the 12th fret to the sound hole to allow for the arch in the top and the deflected neck.

This is how I do it or "try" to do it.

_____________________________

Tom Núñez
www.instagram.com/tanunezguitars

REPORT THIS POST AS INAPPROPRIATE | Date Oct. 12 2007 16:57:52

Ramón

Posts: 440
Joined: Feb. 23 2005
From: La Jolla, Ca

RE: flamenco neck angles, larger fre... (in reply to Ramón)

I've been looking at and reading all I can about this.... Why do some guitars play SOOOOO easy, and something that looks identical is so much harder to barr???

The "no relief" Conde that I looked at plays like butter, and the strings are like 8mm off the soundboard. I read that a 'raised' head makes for a lower bridge, and closer to the soundboard, yet this thing is "on the deck".

Read somewhere that flamenco guitars "should have a flat neck with no relief", so I was curious about feedback. What do [you] guys build in? 0-flat? 1-2mm? 2-3mm?

And I played a classical with those bigger frets (a 'Little Pepe' Romero) that was sweet to barr, yet Yuris Zeltzin (sp?) says (I'm told) "only standard flamenco-size frets... I've found a fret that's only slightly bigger...

*side note* I made (turned) an ebony dowel for my ebony peg-seats. Did a 'trial' one....Works SOOOO good. Almost feels like my planetary pegs!

Again, thanks....

R

REPORT THIS POST AS INAPPROPRIATE | Date Oct. 13 2007 1:26:12

Armando

Posts: 302
Joined: May 27 2005
From: Zürich, Switzerland

RE: flamenco neck angles, larger fre... (in reply to Ramón)

Hi Ramón

My first flamenco guitar has no neck relief and that was not good. I had to make the nut and saddle too high to avoid constant buzzing.

My fourth flamenco guitar has too much neck relief ( between 4 and 5mm) due to a mistake during the construction

and that's even worse. It's not possible to glue the fingerboard without sanding a heavy angle into it. That will look bad as the fingerboard will have about 3mm at the nut, about 5,5mm at the 12th fret and about 2mm at the soundhole. If you don't sand the fingerboard you'll have to glue it with force to the neck which will result in a concave fingerboard (Chiquita Banana

). That is not good at all at any guitar.

I think that 2mm is the right relief for a flamenco guitar. Guitar Nr. 4 is a sad experience of not having paid enough attention on the correct neck angle. Lost of time and money, but sh.. happens

regards

Armando

_____________________________

REPORT THIS POST AS INAPPROPRIATE | Date Oct. 16 2007 20:15:52

tele

Posts: 1464
Joined: Aug. 17 2012

RE: flamenco neck angles, larger fre... (in reply to Ramón)

Old topic, but is it normal for a flamenco guitar's neck to have slight angle/bowing on the neck when looking at it from the bottom of the top towards headstock? I suppose it can't be straight either... Is the proper amount of this slight "bowing" measured by checking the relief by pressing 1st and 12th fret and looking at the gap at 7th fret, between the string? On my guitar I have some bowing and it's certainly more than on my steel stringed guitars... Thanks

REPORT THIS POST AS INAPPROPRIATE | Date Sep. 14 2012 10:44:25

Anders Eliasson

Posts: 5780
Joined: Oct. 18 2006

RE: flamenco neck angles, larger fre... (in reply to Ramón)

When pressing down the 6th string at the 1st and 12th fret,I personally prefer just a bit of air between the 7th fret and the string. Less than 1mm

_____________________________

Blog: http://news-from-the-workshop.blogspot.com/

REPORT THIS POST AS INAPPROPRIATE | Date Sep. 15 2012 21:11:02