ernandez R -> Spalted Birch headstock veneer (Mar. 21 2021 4:31:27)
|
Had this idea after dinner. Laid up with a layer of the same carbon fiber cloth I’ve been using, 6oz/yard, cause I knew the end grain had zero Strength, using 5 min epoxy. Sealed the grain with Vary thin CA, then regular, trimmed the flash with the bandsaw, then into my sanding box and the DA, 180 then 220 grit. Just a quick wipe of boiled linseed oil. All done before the sun set. Three more to go... HR
Images are resized automatically to a maximum width of 800px
|
|
|
|