Body dimensions for student Marlon Navarro (Full Version)

Foro Flamenco: http://www.foroflamenco.com/ - Discussions: http://www.foroflamenco.com/default.asp?catApp=0 - - General: http://www.foroflamenco.com/in_forum.asp?forumid=13 - - - Body dimensions for student Marlon Navarro: http://www.foroflamenco.com/fb.asp?m=330211

Message

---

davewphx -> Body dimensions for student Marlon Navarro (Oct. 25 2020 20:31:03) Can anyone measure their Marlon Navarro student model lower bout width and depth for me? I can't find any body dims on their website or any previous thread....

---

davewphx -> RE: Body dimensions for student Marlon Navarro (Oct. 27 2020 20:45:56) I Just heard back from Jordan at Memorial Music in Texas who is the US dealer for Marlon Navarro.... Evidently there are 630mm scale/ 50mm nut student flamenco negras, and blancas now in stock. Slightly smaller bodies. Here are his measurements... "I will list the dimension category, then the 650 Scale, followed by the 630 Scale... Upper Bout Width: 276mm, 273mm Upper Bout Depth: 95mm, 94mm Lower Bout Width: 365mm, 362mm Lower Bout Depth: 96mm, 95mm" I am going to get a blanca 630mm to test. The 50mm nut on the Cordoba GK spoiled me. He says all actions at 12 fret are right around 2.5mm for Flamencos. Hope I like the 630 scale. I know some people say tensions too low... Anybody try these short scale models?

---

Page: [1]

Forum Software powered by ASP Playground Advanced Edition 2.0.5 Copyright © 2000 - 2003 ASPPlayground.NET