Nut position (Full Version)

Foro Flamenco: http://www.foroflamenco.com/
- Discussions: http://www.foroflamenco.com/default.asp?catApp=0
- - General: http://www.foroflamenco.com/in_forum.asp?forumid=13
- - - Nut position: http://www.foroflamenco.com/fb.asp?m=328598



Message

Blind Dog -> Nut position (Aug. 29 2020 13:18:20)

I got my new Navarro blanca, I love it, but found an issue. The nut is off center. I noticed after playing it for a while the 6 string is closer to the edge than the 1 string. As I looked closer, I realized the nut overhangs the edge a little more on the 6 string side. You can feel it, you can see it. The guitar was shipped with the string tension released so could the nut have slid on its own? I always assumed the nut was glued in place. If not, could I just release the string tension and slide it back over to center? I attached a picture, you can see it easily.



Images are resized automatically to a maximum width of 800px



Blind Dog -> RE: Nut position (Aug. 29 2020 15:29:05)

Never mind, I fixed it.



Ricardo -> RE: Nut position (Aug. 29 2020 16:37:43)

quote:

ORIGINAL: Blind Dog

Never mind, I fixed it.



Honestly that is about how I set them on all my guitars anyway. So when I play the picado run in La Barrosa I don’t yank the 1st off the board.



kitarist -> RE: Nut position (Aug. 29 2020 18:19:56)

quote:

Never mind, I fixed it.


Yeah, you can just move it in its groove, as you probably discovered.



Page: [1]

Valid CSS!




Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET