Drum sander (Full Version)

Foro Flamenco: http://www.foroflamenco.com/ - Discussions: http://www.foroflamenco.com/default.asp?catApp=0 - - Lutherie: http://www.foroflamenco.com/in_forum.asp?forumid=22 - - - Drum sander: http://www.foroflamenco.com/fb.asp?m=295706

Message

---

Ahmed Flamenco -> Drum sander (Sep. 1 2016 20:18:40) Can I make a simple drum sander from a pizza roller with a drill or laminate trimmer? I need something simple and accurate enough for sanding the sides only.

---

Escribano -> RE: Drum sander (Sep. 1 2016 20:39:18) I made a manual sander for the heel by gluing sandpaper to a kitchen rolling pin. You could try this - I am no expert but I would prefer more control.

---

Ahmed Flamenco -> RE: Drum sander (Sep. 1 2016 21:41:49) I want to make it fixed to a piece of wood to sand the side to 2 mm before bending it.

---

Stephen Eden -> RE: Drum sander (Sep. 2 2016 8:18:19) That is a good question Ahmed. Can you make a drum sander from those things?

---

Ahmed Flamenco -> RE: Drum sander (Sep. 2 2016 13:12:47) I need to know the right method but I don't know how and how actually it should be done.

---

jshelton5040 -> RE: Drum sander (Sep. 3 2016 1:09:02) There are lots of DIY (do it yourself) plans for drum sanders on the net. Just do a search and pick the one you think is best for you.

---

constructordeguitarras -> RE: Drum sander (Sep. 3 2016 13:34:44) If you have a drill press, you might try the Safe-T-Planer, available from StewMac.com. http://www.stewmac.com/SiteSearch/?search=safe-t-planer

---

Stephen Eden -> RE: Drum sander (Sep. 5 2016 10:23:28) At a guess there is no right way. Make something and see if works. Then make improvements from there. Others wise I just did a google search for a home made drum sander and got loads of options.

---

Page: [1]

Forum Software powered by ASP Playground Advanced Edition 2.0.5 Copyright © 2000 - 2003 ASPPlayground.NET