Mechanical Flamenco Tuning machines, your recomendation (Full Version)

Foro Flamenco: http://www.foroflamenco.com/
- Discussions: http://www.foroflamenco.com/default.asp?catApp=0
- - Lutherie: http://www.foroflamenco.com/in_forum.asp?forumid=22
- - - Mechanical Flamenco Tuning machines, your recomendation: http://www.foroflamenco.com/fb.asp?m=294895



Message

pundi64 -> Mechanical Flamenco Tuning machines, your recomendation (Aug. 7 2016 21:20:43)

In your opinion what are some fine tuners to put a Flamenco guitar aftermarket.
I agree to what has been said in here, if you looking for pretty jewelry to hang on your
guitar, you will pay the price, high end, for a nice looking, very functional
tuner, with out the big name , like Rogers, Allessi, Baljak, Sloane, Rubner, etc, there are
Very nice DE Jung tuners that'll give you good service.
First pic is a Cordoba Premium, 2nd De Jung, Alice, etc, I'm sort of leaning towards the De Jung's myself
These can be bought from $12.00 to $79.00
























Images are resized automatically to a maximum width of 800px



VAHE -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 5:30:28)

TRY ALESSI TUNERS ITS HAND MADE IN ITALY . ABOUT $600.00

ON THE LOWER END TRY RUBNER TUNERS THE HIGHER END. ABOUT $200.00



Echi -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 8:49:09)

You can have Alessi for less. In Italy they are sold at 350 euro and there are a lot of options.
Very good are also M&M (handmade in Italy) and Exagon tuning machines.
Paco used a good model of Gotoh (130 euro) and they are very smooth.



Stephen Eden -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 11:02:22)

I've been a bit disappointed with the Alessi I recently received. I bought 3 different models not cheap ones either. All of the post holders have fairly bad pitting as if the casting went wrong but the used them any way. not what you want in a £400 set of tuners. this was on all three sets and 2 different types of metal too.

M&M tuners are great if you can get hold of him. I've sent him 5 or 6 emails lately and have heard nothing back from him.

Gotoh seem to consistently meet high standards in their premium range and even in the lower end tuners. So I think I will be using those until my partner Sabrina learns how to make them!



Tom Blackshear -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 11:48:24)

If Gotoh would make a premium tuner with a lyre and Spanish appearance, similar to the Fustero machines, I would buy them, as they are a good working machine.



Echi -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 13:09:31)

Tom, Gotoh recently introduced a lyra model very similar to Fustero. I saw them in Maditer.
Alessi still makes everything by hand and when he is under pressure with the orders can be a little less accurate than usual.
When this happened he always was available to apologise and replace the tuners for what it worths.
Generally speaking I find him quite consistent though.
M&M is a very small company based in Treviso, Italy. The production of tuners is a very small part of their business. If you want I can make them a buzz.



Leñador -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 14:04:56)

quote:

M&M is a very small company based in Treviso, Italy. The production of tuners is a very small part of their business. If you want I can make them a buzz.

When I'm building houses I always shrug when clients begin purchasing products from Italy. They always take a lifetime to get here opposed to any other European country......rivaled maybe by Spain.....



Tom Blackshear -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 14:33:56)

quote:

Tom, Gotoh recently introduced a lyra model very similar to Fustero.


Thanks For the thought but I'm still able to purchase Fusteros in Spain. For small quantities and strictly as a personal favor, right now. I don't know how long it will last.

He is closed to the market, as far as I know.



Echi -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 8 2016 22:56:59)

I like the appearance of the Fusteros more than anything else (I actually have a couple of top of the line sets) but I sadly have to admit that they are not as smooth and reliable as Gotoh, Alessi etc.
Fustero now is regularly working as before being just more expensive.
I was told by a Spanish friend that Fustero makes anyway a very good price for the Spanish makers and therefore still sells quite well.



Stephen Eden -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 9 2016 10:11:04)

I've used 3 sets of Fusteros so far and I really don't think they are much to be rated. The term shiney and bright comes to mind.

If I was pulling the same money as you Tom for my guitars I would be using Rodgers or Graf.



Tom Blackshear -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 9 2016 13:04:40)

quote:


If I was pulling the same money as you Tom for my guitars I would be using Rodgers or Graf.


I hear you and I have used them before but I like the Fustero motif better as it is characteristically a Spanish machine.

Even Gotoh is a good working machine but it's not quite the motif I'm looking for. But if someone wants me to use what you suggest, then I'm open to accept it, as long as they provide the machine so I don't have to special order it.

Also, price differences are not accepted against any guitar order.



Ricardo -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 9 2016 17:57:02)

Bought these off of a Japanese site, decent price in December. 35G3600T two tone finish.

http://www.foroflamenco.com/upfiles/313/Ki19506.jpeg



jshelton5040 -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 9 2016 23:14:47)

quote:

ORIGINAL: Tom Blackshear


Even Gotoh is a good working machine but it's not quite the motif I'm looking for. But if someone wants me to use what you suggest, then I'm open to accept it, as long as they provide the machine so I don't have to special order it.

I used to buy the same Gotoh's that now cost $72 at Stewmac for $11, at that time they were making some really fancy tuners with inlayed abalone that sold for $140. I looked at a set and they were exactly the same $11 tuners with fancy touches. Gotoh's were all we used for many years but the price just kept creeping up with no change in quality.

A few years ago we came across Der Jung tuners from Taiwan. The high end ones are very similar to Gotoh although maybe not quite as smooth but the bulk price is very competitive. I can throw away any set that seems a little rough and still save money. Tuners are basically a worm drive like is found in many power tools. If I can buy a drill for $50 that will last for years at high rates of speed why are tuners so expensive? I say they are all a rip off. A really good set should sell for $10-$20.



Leñador -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 10 2016 3:28:24)

I think it's because the worm drive on my skil saw and drill don't have to be decorative. None the less, I'm sure it's just a simple case of supply and demand. Power tools are pumped out by the billions, tuners not so much I'm sure.



Stephen Eden -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 10 2016 8:13:04)

It's more of a quality thing John. The high end, hand made tuners are such a lovely thing to put on your guitars. The £10 tuners not so much.

There is also a substantial difference in the quality from the regular £50 Gotoh to the Premium Gotoh. Not just in the gearing but the quality of the entire product.

Der Jungs retail prices just seem way to high for what you get. I have been given a set that apparently cost £250. They seem of the same quality as the £20 Der Jungs. Just using MOP buttons and Abalone inlays[:'(]

The worm drives on power tools don't have to have as High tolerances perhaps? I'm not sure which power tools have worms in though so I can't be sure.



Escribano -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 10 2016 8:59:46)

A shout out for Schaller. I installed the black button version on my Bernal many years ago and they have been fine.



Images are resized automatically to a maximum width of 800px



jshelton5040 -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 10 2016 14:09:59)

quote:

ORIGINAL: SEden

Der Jungs retail prices just seem way to high for what you get. I have been given a set that apparently cost £250. They seem of the same quality as the £20 Der Jungs. Just using MOP buttons and Abalone inlays[:'(]


That was the case with Gotoh's years ago. I haven't used any high end Gotoh's recently so can't comment on current quality difference.

quote:


The worm drives on power tools don't have to have as High tolerances perhaps? I'm not sure which power tools have worms in though so I can't be sure.

Only drills with a 90 degree bend have worm drives. I have an old worm drive power saw that I have worked to death and it still functions flawlessly. I suspect the worm drives on power tools are built to higher tolerances and with better materials to withstand the punishment they take and literally millions of revolutions. One big difference of course is most power tools have bearings instead of cheap pot metal bushings like tuners.



SephardRick -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 11 2016 14:13:24)

Ricardo,

I've been looking for a pair of 35G600T. I love the two-tone metal, red knobs, and cherub stampings.

The only source I've found is:

http://g-jax.com/510/35g3600t.html

Is that were you got yours?



Images are resized automatically to a maximum width of 800px



RobJe -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 11 2016 15:07:16)

quote:

I love the two-tone metal, red knobs, and cherub stampings.


Well, who doesn't - but if you start to pay serious money it is worth getting 1:18 or 1:18 rather than 1:14 ratio. Both can be seen in the pictures posted so far.

Then there is also the first law of tuners. If you are thinking of tuners that cost more than 5% of the current value of your guitar you should get a new guitar instead.

Rob



Ricardo -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 11 2016 18:20:54)

quote:

ORIGINAL: SephardRick

Ricardo,

I've been looking for a pair of 35G600T. I love the two-tone metal, red knobs, and cherub stampings.

The only source I've found is:

http://g-jax.com/510/35g3600t.html

Is that were you got yours?




That's the place. You can customize the color and style.

Images are resized automatically to a maximum width of 800px



Tom Blackshear -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 12 2016 12:27:13)

quote:


I've been looking for a pair of 35G600T. I love the two-tone metal, red knobs, and cherub stampings.


I think the machine would have wider appeal for the Japanese maker to stay with a neutral style rather than try to emulate universal appeal with a spiritual image on their machines.

I'm not against spiritual things, just images on my machines. I would love to see that style be toward a more Spanish motif with MOP oval tuning buttons. AT THE PRICE THEY QUOTE, I'd buy them in a New York minute.



Ricardo -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 12 2016 20:16:47)

quote:

ORIGINAL: Tom Blackshear

quote:


I've been looking for a pair of 35G600T. I love the two-tone metal, red knobs, and cherub stampings.


I think the machine would have wider appeal for the Japanese maker to stay with a neutral style rather than try to emulate universal appeal with a spiritual image on their machines.

I'm not against spiritual things, just images on my machines. I would love to see that style be toward a more Spanish motif with MOP oval tuning buttons. AT THE PRICE THEY QUOTE, I'd buy them in a New York minute.


More like these with the 2W or 2M option?
http://g-jax.com/510/machine-heads/classic-guitar-tuner/35g1600.html

$84 !!! They make them custom to your order so it takes a couple weeks but I was very satisfied.



pundi64 -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 12 2016 22:19:22)

Here is what I bought yesterday a Rubner. All other pics in this thread are nice, there so many to choose from makes a guy crazy looking.



Images are resized automatically to a maximum width of 800px



pundi64 -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 19 2016 19:51:46)

OK looks good, but who makes them is the big question?



SephardRick -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 19 2016 19:59:13)

Dan,

The 35G600T tuners are made by Gotoh. Here is a link to the manufacture:

http://g-gotoh.com/international/product/35g3600t.html

They also have more politically correct patterns to please guys like Tom.


By the way, I wrote to Gotoh for a US source. They recommend JAPARTS.ca. out of Vancouver, BC. From there I got a quote of $74.17, plus $22.99 freight for a total of $97.16 delivered to Louisiana. Sorry, Ricardo! Transaction are via PayPal. Thus making a secure transaction.

So, I have a pair on the way with a lead time of two to four weeks. I just hope my Vicente Sanchis looks half as good as Ricardo's photo with the new tuners.



Wayne Brown -> RE: Mechanical Flamenco Tuning machines, your recomendation (Aug. 19 2016 23:06:13)

www.lmii.com sells Gotoh tuners in the US, but not the 35G600T tuners.



Page: [1]

Valid CSS!




Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET