Bending guitar sides using air gun?! (Full Version)

Foro Flamenco: http://www.foroflamenco.com/ - Discussions: http://www.foroflamenco.com/default.asp?catApp=0 - - Lutherie: http://www.foroflamenco.com/in_forum.asp?forumid=22 - - - Bending guitar sides using air gun?!: http://www.foroflamenco.com/fb.asp?m=279888

Message

---

Ahmed Flamenco -> Bending guitar sides using air gun?! (Jul. 22 2015 23:19:11) For my first guitar I used steam from teapot and I bent piece by piece without a mold and it was exhausting so I don't want to go to it again. so is it good to use air gun with a mold?!

---

Stephen Eden -> RE: Bending guitar sides using air gun?! (Jul. 23 2015 8:55:07) You may want to find away to set your heat gun up so it heats a metal tube rather than heating the wood directly. Check out the IBEX bending iron. That should give you an idea of what a lot of us use.

---

tijeretamiel -> RE: Bending guitar sides using air gun?! (Jul. 23 2015 13:17:24) I've seen a few homemade bending irons here. http://forum.ukuleleunderground.com/showthread.php?78833-Homemade-bending-iron-for-40-at-the-big-home-store

---

Page: [1]

Forum Software powered by ASP Playground Advanced Edition 2.0.5 Copyright © 2000 - 2003 ASPPlayground.NET