Brace tuning

Brace tuning (Full Version)

Foro Flamenco: http://www.foroflamenco.com/
- Discussions: http://www.foroflamenco.com/default.asp?catApp=0
- - Lutherie: http://www.foroflamenco.com/in_forum.asp?forumid=22
- - - Brace tuning: http://www.foroflamenco.com/fb.asp?m=265915

Message

theodoropoulos -> Brace tuning (Sep. 26 2014 11:54:22)
i am confused by the bass bars in violins..and what i mean??i see that we add mass in a tone bar to get bass in sound.... So when i have a tone bar and want to add bass in sound should i make it tall in the middle and add more mass this way,or am i saying nonsense?? I feel that less mass=bass in sound.... but i have stucked with violin bass bars.... any lights????[8\|]

bernd -> RE: Brace tuning (Sep. 26 2014 13:04:21)
As not being a violonist, I assume that bracing bars´ excercise is at first bringing stability to the top. That´s my statement as a guitarist. I´m sure the luthiers on this forum can give a much more qualified statement.

Joan Maher -> RE: Brace tuning (Sep. 26 2014 14:28:21)
Wrong Foro.. it's for Flamenco guitars try here https://www.violins.ca/forums/

theodoropoulos -> RE: Brace tuning (Sep. 26 2014 16:24:51)
wrong answer Joan! i know what i am writing and saying....I build guitars and made a parallesm with violins... and to be more clear: if i add mass to a brace does the pitch lowers or gets higher?

estebanana -> RE: Brace tuning (Sep. 26 2014 21:04:15)
Tall thin braces = higher Low wide braces - lower Is it fun to troll? I mean in fishing, trolling means to let out a lot of line with bait and pull it until you catch fish? You line fishing by trolling or with bobber and worm? I guess it depend if you want catch the trouts, those eels or the flounders.

Jeff Highland -> RE: Brace tuning (Sep. 26 2014 21:08:49)
It's a simple question for which there is not a simple answer. You need to take account of both the mass AND the stiffness at the same time. Looking at a brace or tone bar in isolation, not glued to a soundboard. Basic marimba bar tuning -remove material from the middle you lower the stiffness in the centre and lower the pitch -remove material from the ends you lower the mass at the ends and raise the pitch -add mass to the centre, lower the pitch Try it yourself with a bar of wood, hold it in your fingers at about 25% from the ends, adjust position till you get a clear note tapping it in the centre. record the pitch. Now add some mass to the centre, by taping on a coin, record pitch Now take off the mass and scallop the centre etc But none of this is a simple predictor of how you will affect the voicing of a guitar

estebanana -> RE: Brace tuning (Sep. 26 2014 22:42:57)
I still don't understand the first question. It's not clear what he's asking about. One reason is that there is no context relating the question to a specific part of the guitar. The violin bass bar is a different kind of brace than the transverse braces in guitars. One main reason is that it is not coupled to the sides. Tuning braces> It's not as simple as just removing material from middle or ends to raise of lower the pitch of the bar stopped at a node. The weight and stiffness of the braces relative to the thickness of and flexibility of the back or top plate is more important. Issue is not tuning the braces, that is a illusion. What is really happening is that when braces are cut down after being glued to a top of back weight and stiffness are being redistributed and it effects flexibility and mass of the completed structure. I think tuning braces is a dead end, weight and stiffness is key. There are four main sub assemblies, Top, Back, Ribs, Neck...each needs to be in target stiffnesses and weights, like why stop to tune braces? There's already too much work to do.

Jeff Highland -> RE: Brace tuning (Sep. 27 2014 1:17:01)
Agreed 100% Estebanana ,Tuning of individual braces was advocated by Siminoff and adopted by Bogdanovich, but I consider it BS.

theodoropoulos -> RE: Brace tuning (Sep. 27 2014 2:26:34)
ι have the ART OF TAP TUNING of Siminoff and when he removes wood from the end of the braces the pitch lowers and that is the opossite of what you suggest(if i understand correct in isolated brace) thats the tricky part when you glue to tje soundboard.The brace's stifness alters and i think you cannot predect..to be honest i have never seen removing wood and raise the pitch..... the connection between mass and stifness is very correct in my opinion as you said... Forgive me if i confused you with violins..just forget it....

Jeff Highland -> RE: Brace tuning (Sep. 27 2014 3:18:19)
The biggest improvement you will get is to remove the mass of any of Simminof's books from your bookshelf.

theodoropoulos -> RE: Brace tuning (Sep. 27 2014 3:25:31)
why you say that???

Jeff Highland -> RE: Brace tuning (Sep. 27 2014 3:27:50)
Because they are full of misinformation Siminoff has been great at self promotion but not at accuracy

Jeff Highland -> RE: Brace tuning (Sep. 27 2014 3:44:37)
Removing wood from either the centre or to a lesser extent the ends of a brace glued in place to a soundboard attached to the rims will lower the pitch Not because you have reduced the mass, but because you have reduced the stiffness.

estebanana -> RE: Brace tuning (Sep. 27 2014 4:03:20)
quote: The biggest improvement you will get is to remove the mass of any of Simminof's books from your bookshelf. That was funny. The other day you mentioned Kasha design as poor design. I have know makers who've actually made good flamencos with Kasha bracing. I think it does make a stiff middle under the bridge, but leaves the areas out side the wings of the bridge more open. The areas the Kasha design seems oy brace are not super remote from where a five fan under the bridge design would hit. I can see how you could make it work with a thin top and the right bridge. The part of the Kasha system I don't think is good intentionally putting weights in the headstock to create whatever they called it an "intertial stop" or some off term. But mechanically if you did the Kasha bracing I cant see why it is much different than variations on lattice bracing which stiffen the center and radiate out. It's a mechanical thing not a theoretical thing. If you stiffen the top with some braces it will do something, but when Kasha tried to explain with a formula that leas with acoustics it over complicates some think that is real simple in concept. They used terms like Bridge Impedance, meaning the bridge cancels out some string energy and tried to fix this by making a funny looking bridge. Why not look at the bridge as another kind of brace? So I think the Kasha braces, not too big, and a thin top a Spanish bridge would make a flamenco guitar, but why bother to explain it with maths? Or why bother when fan braces work even better and you don't l have make bunch of braces that look like fish bones. What I think is Kasha and Richard Schneider liked going fishing and they ate a big fat sea bass and looked at the bones left over as they pulled the delicious meat off the skeleton. They they said OK lets make some guitar braces that look like this fish skeleton and come up with a theory that makes it sound really super duper. And they did, and nobody plays them anymore.

Jeff Highland -> RE: Brace tuning (Sep. 27 2014 5:30:54)
Not so much the final implementation of what we know as Kasha Bracing but the concept that Kasha as a scientist (physical Chemist) thought he could redesign the guitar by application of scientific principles alone. That seems pretty arrogant to me. I don't particularly like the discontinuity of the bracing at the bridge area. The was a similar radial bracing desigh by an Australian Luthier whose name I cant recall at around the same time

theodoropoulos -> RE: Brace tuning (Sep. 27 2014 5:55:14)
i think that Kasha tries to make a sculpture under a top rather than pay attention to distribution of resonances....

Anders Eliasson -> RE: Brace tuning (Sep. 27 2014 6:53:36)
why do you want to learn about guitar building talking about violins? I build both, and besides being made out of wood, having a box and a stick with strings on, IMHO, they have very little in common. I think Siminoff designed the ovation guitar? If thats true, it explains everything.

theodoropoulos -> RE: Brace tuning (Sep. 27 2014 9:19:37)
yes you are correct about violins... hmmm but in mandolins for example???why is there a bass bar??? violin was an example my friend to show if mass=more bass...ok? and what about ovation?what do you mean? ovation is bad??i just ask.....i also dislike non wood back guitars...

Tom Blackshear -> RE: Brace tuning (Sep. 27 2014 11:36:55)
The way I tune the voice in a guitar is first, I make sure everything in the building process is done and balanced as correct as it can be, and then for the final tuning, I adjust the bracing by using a slight sanding-polishing method to bring each brace into a synergistic relation with the other braces to finalize and create total harmony, as best I can. https://www.youtube.com/channel/UCn_ftUZWUdp9OzO-aOAFRUg This final tuning helps set the articulation and top tension, as well. Also, the top tuning can be adjusted up or down in its key, to a certain extent, with how the braces are treated in the adjustment phase. But there will come a time when it's better to stop the tuning process, or you will lose the gain you have created.

Tom Blackshear -> RE: Brace tuning (Sep. 27 2014 11:54:35)
I think Siminoff designed the ovation guitar? If thats true, it explains everything. [/quote] Anders, I think Charlie Kaman designed the Ovation guitar.

theodoropoulos -> RE: Brace tuning (Sep. 27 2014 13:20:26)
by the way , my soundboard weight is 140 gr... is that ok for a flamenco guitar? i used cedar top and cedar of lebanon braces...

Tom Blackshear -> RE: Brace tuning (Sep. 27 2014 13:34:05)
The width between lines does not matter but how the top is braced. Most older masters are thin toward the center and grow wider toward the outside edge. A good norm is about 1 MM between lines, and a little thinner toward the middle. The weight should be determined by the bracing design. Fewer braces; thicker the top. More bracing should have a thinner top. The louder the sound is sometimes adjusted by using a thinner brace.

Page: [1]

Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET