Help Stripping '65 Ramirez Top

Help Stripping '65 Ramirez Top (Full Version)

Foro Flamenco: http://www.foroflamenco.com/
- Discussions: http://www.foroflamenco.com/default.asp?catApp=0
- - Lutherie: http://www.foroflamenco.com/in_forum.asp?forumid=22
- - - Help Stripping '65 Ramirez Top: http://www.foroflamenco.com/fb.asp?m=251252

Message

El Polaco -> Help Stripping '65 Ramirez Top (Feb. 4 2014 13:56:14)
I have decided to refinish one of my old Ramirez (1965) guitar tops. It is original FP finish (or so I thought) - destroyed and badly discoloured with many old digs bangs from previous owners etc... I started with rags and alcohol... seemed to be biting into the finish a little at first but it is not desolving as I thought it would. I put enough alcohol on the surface to make sure it was not evaporating too quickly but still after a lot of work, almost nothing is coming off... Did Ramirez have a formulation that is not traditional shellac and what can I use to remove it without resorting to sanding? I have refinished other french polished guitars guitars made much more recently by American makers plus my own of course with no problem...

Ruphus -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 14:08:33)
They used nitro laquer as well. Ruphus

El Polaco -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 14:20:34)
As far back as the 60s? I thought all their guitars were French polished back then... That's interesting....

C. Vega -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 14:51:58)
By 1965 Ramirez was using a sprayed two-part catalyzed urethane finish for most of the guitars that were made in their own shop. Shellac was available on special order. Ramirez never used nitrocellulose lacquer on their own guitars but some of the outside manufacturers from whom they bought their student model guitars possibly did. Nitro lacquer was never very popular with Spanish manufacturers or individual makers. These days, "lacquer" has become a generic catch-all term for any guitar finish that isn't French polished shellac. Ramirez guitars are still finished with a catalyzed urethane (even if they do refer to it as "lacquer" on their website) but it's a totally different formulation than what was used in the 1960s. The current guitars are finished by a subcontractor. Ramirez has not done any finishing in-house since the early 1990s.

El Polaco -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 15:06:47)
Thanks, That is very interesting information indeed! I have started to sand the finish off slowly... It seems to be very thin so it probably didn't affect the tone of the guitars adversely.

Morante -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 15:24:40)
I should have thought that el cuchillo would be a better bet to start, with light sanding after?

NewPlayer -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 19:28:54)
Be sure to post pictures - Before and After.

jshelton5040 -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 20:14:27)
quote: ORIGINAL: Morante I should have thought that el cuchillo would be a better bet to start, with light sanding after? Tops tend to be a little uneven and with the bridge and fingerboard in the way a scaper tends not to work very well. Particularly on a cedar top which this Ramirez probably has. I've just done a couple of refinish jobs similar to what Jorge is doing and sandpaper is really the only option anymore since paint remover has been banned by our meddling government.

El Polaco -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 21:11:20)
You're right John although the top looked pretty flat before I started sanding, I did pick up the scraper for a minute and laid it on the top and realized very quickly that it was indeed uneven in several places. Around bridge, fingerboard, some brace waviness etc... Of course the next small challenge is going to be how to best match the top color with the existing cypress golden sides ... I'm experimenting with some scrap Canadian red cedar pieces....

estebanana -> RE: Help Stripping '65 Ramirez Top (Feb. 4 2014 23:48:28)
I remember the days you could just buy some Jasco stripper and have it done in minutes.

NewPlayer -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 1:24:45)
Don't mean to hijack the thread, but what's the best way to strip Nitro? Lacquer remover/thinner? Strip? Sand?

KMMI77 -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 3:40:00)
I stripped the back and sides of a cheap factory guitar with this. The guitar had a thick and hard glossy finish. I'm not 100% sure exactly what the finish was. Anyway, two applications of this stuff and it was back to the timber without incident. I didn't think it would work as well as it did. Images are resized automatically to a maximum width of 800px

Ruphus -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 14:51:33)
quote: ORIGINAL: jshelton5040 sandpaper is really the only option anymore since paint remover has been banned by our meddling government. Poor guys who may refurbish antique windows with half a dozen of layers on them. Been there once. And after a start with scraper and sand paper I was so glad about the merrits of paint remover. Still hard to do, yet so much easier. Just saying. Ruphus

Morante -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 15:39:03)
quote: and sandpaper is really the only option anymore since paint remover has been banned by our meddling government. Wow! I remember stripping a Bernal top for Antonio Jero, using Nitromors. Worked a treat, but I suppose that in Spain you can still buy anything from cyanide to uncut heroin[;)]

C. Vega -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 15:46:20)
Be very careful using any paint removers. They may remove lacquer and varnishes very well but they can also pull/leech color from the rosette and purflings.

Ricardo -> RE: Help Stripping '65 Ramirez Top (Feb. 5 2014 15:56:56)
quote: ORIGINAL: El Polaco I have decided to refinish one of my old Ramirez (1965) guitar tops. It is original FP finish (or so I thought) - destroyed and badly discoloured with many old digs bangs from previous owners etc... I started with rags and alcohol... seemed to be biting into the finish a little at first but it is not desolving as I thought it would. I put enough alcohol on the surface to make sure it was not evaporating too quickly but still after a lot of work, almost nothing is coming off... Did Ramirez have a formulation that is not traditional shellac and what can I use to remove it without resorting to sanding? I have refinished other french polished guitars guitars made much more recently by American makers plus my own of course with no problem... Would be cool to see some photos of your work. Cedar top flamencos are interesting because it's sort of ok that the top color doesn't match the sides and back. Ricardo

El Polaco -> RE: Help Stripping '65 Ramirez Top (Feb. 6 2014 16:39:28)
Silly me, I didn't think about documenting this process so I didn't take any before pics... Thought it would be a simple strip but that obviously was not the case.! I do have some photos of the guitar as it was before somewhere on my computer I'll dig them out.. The sanding went well and I am building up blond shellac as we speak. After I have it sufficiently leveled it, I will switch to an orangy red color that I came up with after quite a bit of experimenting on scraps of the same cedar. I'll post pics as I progress. Incidentally, I really love this classic Ramirez rosette (now that I can see it!) that got the name the "Sabicas Rosette" by some. Jorge Images are resized automatically to a maximum width of 800px

estebanana -> RE: Help Stripping '65 Ramirez Top (Feb. 7 2014 1:04:22)
Oh GOD! PLEASE PLEASE DOCUMENT THE STRIPPING OF A GUITAR!! OMG OMG I have not stripped a guitar in several years and I am freaking dying to use strippers and solvents that splash in your eyes and burn the hair off your forearms. God yes! OMG I have not thad that much fun since high school when my first after school job was stripping and refinishing furniture for an antique shop! Hell yes document that shiet, good freaking times! Just kidding. Kind of.

FERREREZAKI -> RE: Help Stripping '65 Ramirez Top (Jun. 2 2014 19:51:49)
Still waiting for updates. Eager to so how it turned out! [:)]

cabezadevaca -> RE: Help Stripping '65 Ramirez Top (Jun. 2 2014 21:11:56)
I fondly recall stripping the cherry-red off a mid-60s Gibson SG-II with Jasco and then discovering why they probably put that opaque red on there in the first place. I also attempted to take an early 70s ARIA CG down to lumber and FP the top, I was young and impatient and the experience scarred me emotionally for a number of years. I think I have matured and rebuilt the courage to take on refurbishing something neglected and unloved (or perhaps overloved) and would love to see more photos. If this were to turn into a refinishing thread I'd be interested to hear if anyone knows anything about the cashew based varnish Kohno used?

estebanana -> RE: Help Stripping '65 Ramirez Top (Jun. 3 2014 8:58:14)
quote: If this were to turn into a refinishing thread I'd be interested to hear if anyone knows anything about the cashew based varnish Kohno used? Hello Cowface, Cashew varnish is an easy to acquire varnish in Japan every hardware store carries it. I would not call it super high quality stuff, but it ain't bad. You're as likely to find it on a table top in a restaurant as on a Kohno. What do you want to know about it?

cabezadevaca -> RE: Help Stripping '65 Ramirez Top (Jun. 3 2014 14:34:26)
quote: ORIGINAL: estebanana quote: If this were to turn into a refinishing thread I'd be interested to hear if anyone knows anything about the cashew based varnish Kohno used? Hello Cowface, Cashew varnish is an easy to acquire varnish in Japan every hardware store carries it. I would not call it super high quality stuff, but it ain't bad. You're as likely to find it on a table top in a restaurant as on a Kohno. What do you want to know about it? Well, the funny thing is, its almost impossible to find in Brazil which is where 'caju' comes from originally, at least I've never been able to find it in RJ or SP state, I never looked in Bahia or PB. I've never found a source in the U.S. either.

estebanana -> RE: Help Stripping '65 Ramirez Top (Jun. 3 2014 14:38:18)
It's made in China too.

Page: [1]

Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET