Shawn Brock -> RE: Players (especially): Preferred Nut Width? (Mar. 9 2012 0:36:26)
|
It seems for me, there has to be a balance between neck thickness and neck width. If a neck is 53 or 54 MM, I like for it to be pretty thin, (I should measure just how thick), but if a neck is 52 or 51 MM, I definitely want it to be on the thicker side. That's just me and my average size hands... It also seems that if I'm playing on a wider neck that I don't like as much graduation in how the neck is tapered. I have also noticed that I like a neck to be a little more on the flat side if its wider, and somewhat more rounded if its 52 MM or less. All in all, it still seems that if a luthier is making a guitar, and he don't know who the buyer is going to be that he is still better off going with a 52 MM nut. But I'm just talking as a guitar buyer, not a luthier. As I said before, I have no reservations about playing on a guitar that has a 52 MM nut. I just sold a 2008 Navarro which I had here for a short time, and I wish I had measured the thickness and taper of the neck, because that was hands down the best feeling neck that I had played. I don't know what it was about it, it didn't have a carbon fiber rod, it just had an ebony reinforcement strip, the neck wasn't to thick and chunky, and the string spacing was just killer. Aw yes, the lost opportunities...
|
|
|
|