Foro Flamenco


Posts Since Last Visit | Advanced Search | Home | Register | Login

Today's Posts | Inbox | Profile | Our Rules | Contact Admin | Log Out



Welcome to one of the most active flamenco sites on the Internet. Guests can read most posts but if you want to participate click here to register.

This site is dedicated to the memory of Paco de Lucía, Ron Mitchell, Guy Williams, Linda Elvira, Philip John Lee, Craig Eros, Ben Woods, David Serva and Tom Blackshear who went ahead of us.

We receive 12,200 visitors a month from 200 countries and 1.7 million page impressions a year. To advertise on this site please contact us.





symmetrical fan braces??   You are logged in as Guest
Users viewing this topic: none
  Printable Version
All Forums >>Discussions >>Lutherie >> Page: [1]
Login
Message<< Newer Topic  Older Topic >>
 
yourwhathurts69

 

Posts: 117
Joined: Sep. 16 2009
 

symmetrical fan braces?? 
are struts usually symmetrical on fan brace designs like santos, reyes, etc...?

i have seen a few guitar plans and the position of the struts are not always symmetrical (for example, on a 7 strut design, struts 1 and 7, 2 and 6, etc... are not in the exact same relative position). is this just a printing error, or are the struts really not symmetrical?

(i'm not concerned with the struts actually having the same thickness and width. i realize these dimensions are not always the same on the bass and treble side of the guitar).
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 8 2010 3:46:47
 
Armando

Posts: 302
Joined: May 27 2005
From: Zürich, Switzerland

RE: symmetrical fan braces?? (in reply to yourwhathurts69) 
Hy yourwhathurts69

This is a common question asked by newbies. You may find more information about this in previous treads in this forum.

However i can tell you something about this issue.

Both kind of bracing patterns are existing, the symetrical and the asymetrical system.

Most luthiers swear for one or the other system and some of them are using both systems depending on the sound and tonal character they want to achieve in the particular instrument.

Most famous luthiers have changed their bracing pattern during their lifetime, not mainly from symetrical to asymetrical or vice versa, but rather developed their bracing layout within their favoured system.

This is valid also for the two Luthiers, Santos Hernandez and Manuel Reyes.

best regards

Armando

_____________________________
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 8 2010 17:30:32
 
yourwhathurts69

 

Posts: 117
Joined: Sep. 16 2009
 

RE: symmetrical fan braces?? (in reply to yourwhathurts69) 
hey, armando

thanks for the reply.

i think i need to clarify a little. i don't mean asymmetrical vs symmetrical design. i mean the symmetrical style designs (ie 1933 santos, etc...) aren't completely symmetrical in the plan. they look symmetrical to the eye, but if you use a ruler to to measure the exact position of the braces, you will see the bass and treble sides of the soundboard are slightly different.

i'm wondering if this is just a printing error, or if there really is a reason to position the struts in a slightly non-symmetrical position.

thanks.
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 8 2010 21:47:44
 
jshelton5040

Posts: 1500
Joined: Jan. 17 2005
 

RE: symmetrical fan braces?? (in reply to yourwhathurts69) 
quote:

ORIGINAL: yourwhathurts69

i'm wondering if this is just a printing error, or if there really is a reason to position the struts in a slightly non-symmetrical position.


Maybe its a result of Santos knowing that the position of the struts is not critical so he just slapped them on in a general location .

_____________________________

John Shelton - www.sheltonfarrettaguitars.com
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 8 2010 23:44:21
 
Armando

Posts: 302
Joined: May 27 2005
From: Zürich, Switzerland

RE: symmetrical fan braces?? (in reply to yourwhathurts69) 
quote:

i mean the symmetrical style designs (ie 1933 santos, etc...) aren't completely symmetrical in the plan. they look symmetrical to the eye, but if you use a ruler to to measure the exact position of the braces, you will see the bass and treble sides of the soundboard are slightly different.


o.k. got it.

Well that's hard to say. The bracing might and might not have been placed slightly assymetrical by purpose. In the case of Manuel Reyes we see that he uses a bracing pattern which is actually symetrical but the width and the height of the bracing differs slightly from one to the next, so that the pattern adds more stiffness to the the "treble" side of the soundboard. In this particular case it is quite obvious that the slight asymetry is not there by coincidence.

If the bracings are all of the same width and height i am with jshelton5040.

regards

Armando

_____________________________
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 9 2010 21:12:00
 
RobJe

 

Posts: 731
Joined: Dec. 16 2006
From: UK

RE: symmetrical fan braces?? (in reply to Armando) 
quote:

In the case of Manuel Reyes we see that he uses a bracing pattern which is actually symetrical but the width and the height of the bracing differs slightly from one to the next, so that the pattern adds more stiffness to the the "treble" side of the soundboard. In this particular case it is quite obvious that the slight asymetry is not there by coincidence.


I know that the Blackshear Reyes plan has all these different dimensions but these came from the measurement of just one guitar. Is there any evidence (from other measurements or Reyes stated intentions) that this is deliberate and not just the result of a bit of post-build tweaking and/or believing that the measurements are not critical anyway?

Rob
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 10 2010 17:18:04
 
jshelton5040

Posts: 1500
Joined: Jan. 17 2005
 

RE: symmetrical fan braces?? (in reply to RobJe) 
quote:

ORIGINAL: RobJe

I know that the Blackshear Reyes plan has all these different dimensions but these came from the measurement of just one guitar. Is there any evidence (from other measurements or Reyes stated intentions) that this is deliberate and not just the result of a bit of post-build tweaking and/or believing that the measurements are not critical anyway?


Do you think there's any chance that after bracing the top a master luthier like Reyes might have tapped on it and flexed it and decided that the braces needed to be altered? Individual luthiers don't build guitars like factories do. Each one is unique. We've tried many different bracing patters and still find ourselves changing patterns and dimensions to try to achieve a better guitar. The changes are getting very small compared to earlier experiments but are still happening and the guitars are still improving.

I admire people like Al Carruth for his efforts at trying to objectively study how the guitar works but even he admits that he's just nibbling at the edges of understanding it. In a lifetime one can build a few hundred guitars which is too small a number to really perform scientific analysis with controls. I for one would be rather unhappy if someone came along with the perfect formula for a guitar but I'm not too concerned about it happening.

_____________________________

John Shelton - www.sheltonfarrettaguitars.com
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 10 2010 17:46:42
 
Peter Tsiorba

Posts: 130
Joined: Oct. 27 2009
From: Portland, Oregon Pacific Northwest

RE: symmetrical fan braces?? (in reply to Armando) 
quote:


Well that's hard to say. The bracing might and might not have been placed slightly asymmetrical by purpose.
Armando


We do know that back then, only hide glue was used in the construction of a guitar. Here is my observation based on working with hide glue:

I don't think that such small asymmetries are intentional. When using hide glue, the brace is generally floated/rubbed slightly on the glue coated surfaces until the glue "grabs". Using fingers, one holds the brace in that location while some sort of clamping is arranged for.

However, the glue rarely grabs in the EXACT spot verifiable with a fine rule.

Another possibility could be that the braces were placed quickly and by eye (call it intuition, if you wish), which contributed "intentional asymmetry" to the brace arrangement. Let me make an analogy from the kitchen. I'm chopping onions with a knife, aiming for a more or less even thickness of cut. Now and then, I veer off a bit, and cut into a slightly thicker or thinner slice. Is that intentional? It does add some texture variation in the browned onion mix, and can be a good thing for certain applications? A group of technically minded people (in my absence) might come up with some incredibly nuanced and complex theories as to why the slight variation occurred. As for me, it was just a slip of the knife or the drift of the hand.

_____________________________

Peter Tsiorba
Classical-Flamenco-Guitars
tsiorba.com
  REPORT THIS POST AS INAPPROPRIATE |  Date Sep. 19 2010 18:16:01
Page:   [1]
All Forums >>Discussions >>Lutherie >> Page: [1]
Jump to:

New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Forum Software powered by ASP Playground Advanced Edition 2.0.5
Copyright © 2000 - 2003 ASPPlayground.NET

0.0625 secs.